Tóm tắt tài liệu kỹ thuật
LEWATIT® S 1567
PDF datasheet mirror for LEWATIT® S 1567 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
- Product Name: Lewatit® S 1567
- Description: Strongly acidic cation exchange resin with uniform size beads (monodisperse) based on a styrene-divinylbenzene copolymer. Manufactured without the use of solvent. Food grade.
- Functional group: Sulfonic acid
- Matrix: Styrenic
- Structure: Gel
- Appearance: Dark brown
- Common Description: Na⁺
- Delivery form: Uniform size beads
Applications
Lewatit® S 1567 is especially applicable for:
- Softening in special systems with regular disinfection
- Softening of drinking water
The resin offers:
- High exchange flow rates during regeneration and loading
- Good utilization of total capacity
- Low demand for rinse water
- Homogeneous throughput of regenerants, water, and solutions, leading to a homogeneous working zone
- Nearly linear pressure drop gradient, allowing for operation with higher bed depth
Operating limits
- Stability pH range: 0-14
- Storage temperature range: -20 – +40 °C
- Operating temperature: max. 120 °C
- Operating pH range during exhaustion: 5-8
- Bed depth for single column: min. 800 mm
- Max. pressure loss during operation: 200 kPa
Feed water
- Regeneration quantity NaCl co-current: min. 100 g/L resin
- Regeneration quantity NaCl counter-current: min. 70 g/L resin
- NaCl regeneration concentration: approx. 8-12 wt. %
Product water
- Total capacity (delivery form): min. 1.8 eq/L
Electrical
Not specified in the extract.
Mechanical / hydraulic
- Uniformity coefficient: max. 1.1
- Mean bead size (d50): 0.60 (+-0.05) mm
- Bulk density for shipment (+/- 5%): 810 g/L
- Density: approx. 1.28 g/mL
- Water retention (delivery form): approx. 44-50 wt. %
- Backwash bed expansion (per m/h at 20°C): 4 %
- Specific pressure loss (at 15°C): 1 kPa*h/m²
- Specific flow rate: max. 40 BV/h
- Regeneration contact time: min. 20 minutes
- Slow rinse at regeneration flow rate: min. 2 BV
- Fast rinse at service flow rate: min. 2 BV
Additional Information
- Safety precautions: Strong oxidants, e.g. nitric acid, can cause violent reactions with ion exchange resins.
- Toxicity: Safety data sheet must be observed.
- Disposal: Follow European waste nomenclature.
- Storage: Recommended above freezing point, under roof, dry, without direct sunlight. If frozen, thaw gradually at ambient temperature.
- Packaging: Packaging stability limited to 24 months under recommended storage conditions.
Disclaimer This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.