Tóm tắt tài liệu kỹ thuật
LEWATIT® Regler ZL
PDF datasheet mirror for LEWATIT® Regler ZL (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
- Product name: LEWATIT® Regler ZL
- Common Description: Polymer-based cation exchange resin in powder form
- Functional group: sulfonic acid
- Matrix: styrenic
- Delivery form: powder
- Edition: 2018-03-09
Operating limits
- Stability pH range: 1-130
- Stability temperature range: °C
- Storage temperature range: -20 - +40 °C
Feed water
- Application: Heterogeneous catalyst in organic synthesis, especially suitable for use in anhydrous reaction media.
Product water
- Total capacity (dry resin): min. 5.0 eq/kg
Electrical
This section is not supported by the extracted text.
Mechanical / hydraulic
- Range of size for >97 vol% of all beads: mm
- Bulk density for shipment (+/- 5%): 520 g/L
- Density: approx. 1.22 g/mL
- Pore diameter: approx. 53 nm
Additional Information
- Safety precautions: Strong oxidants, e.g., nitric acid, can cause violent reactions if they come into contact with ion exchange resins. Observe the safety data sheet.
- Disposal: Ion exchange resins must be disposed of according to the European waste nomenclature.
- Storage: Store under roof in dry conditions, without exposure to direct sunlight, at temperatures above the freezing point of water. If frozen, thaw gradually at ambient temperature before handling or use.
- Packaging: Packaging stability is limited to 24 months under recommended storage conditions. Use within this timeframe or check packaging condition regularly.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.