Tóm tắt tài liệu kỹ thuật
LEWATIT® MP 62 WS Dried
PDF datasheet mirror for LEWATIT® MP 62 WS Dried (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® MP 62 WS Dried is a weakly basic, macroporous anion exchange resin. It possesses tertiary amine functional groups and lacks salt-splitting capacity, resulting in strongly hydrophobic properties.
Common Description
- Delivery form: free base
- Functional group: tertiary amine
- Matrix: styrenic
- Structure: macroporous
- Appearance: opaque
Specified Data
- Uniformity coefficient: max. 1.6
- Range of size for >90 vol% of all beads: 0.4-1.25 mm
- Effective size (d10): 0.55 mm
- Total capacity (wet resin): min. 1.7 eq/L
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 10%): 340 g/L
- Density: approx. 1.02 g/mL
- Residual moisture (delivery form): max. 0.5 weight%
- Stability pH range: 0-14
- Stability temperature range: 1-130 °C
- Storage temperature range: -20 - +40 °C
Additional Information
- Safety precautions: Strong oxidants (e.g., nitric acid) can cause violent reactions. Observe the safety data sheet.
- Disposal: Follow European waste nomenclature within the European Community.
- Storage: Store above freezing point of water, under roof, dry, and out of direct sunlight. If frozen, thaw gradually at ambient temperature before handling or use.
- Packaging: Packaging stability is limited to 24 months under recommended storage conditions. Check packaging condition regularly if used beyond this period.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.