Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® MonoPlus MP 68

PDF datasheet mirror for LEWATIT® MonoPlus MP 68 (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product Identification

  • Product Name: LEWATIT® MonoPlus MP 68
  • Product Type: Weakly basic, macroporous anion exchange resin
  • Matrix: Styrene-divinylbenzene copolymer
  • Bead Type: Uniform size (monodisperse)
  • Functional Group: Tertiary amine / quaternary ammonium
  • Delivery Form: Free base/Cl-
  • Appearance: Beige, opaque
  • Common Description: Macroporous
  • Structure: Macroporous

Operating Limits

  • Stability pH Range: 0-14
  • Storage Temperature Range: -20 to +40 °C
  • Operating Temperature (max): 70 °C
  • Operating pH Range During Exhaustion: 0-8
  • Max. Pressure Loss During Operation: 300 kPa

Feed Water / Application

  • Applicable For:
    • Demineralization of water for industrial steam generation (in combination with strong basic ion exchangers like Lewatit® MonoPlus M 500, especially recommended for Lewatit WS System)
    • Treatment of electroplating rinse waters
    • Demineralization of water with a high concentration of humic acids and other organic substances to protect strong basic anion exchangers from fouling

Resin Properties

  • Uniformity Coefficient (max): 1.1
  • Mean Bead Size (d50): 0.55 ±0.05 mm
  • Total Capacity (delivery form) (min): 1.3 eq/L
  • Bulk Density for Shipment (±5%): 620 g/L
  • Density (approx.): 1.04 g/mL
  • Water Retention (delivery form) (approx. weight %): 54-60 %
  • Volume Change (free base / Cl- - Cl-) (max. approx. %): 24 %

Operational Parameters

  • Bed Depth for Single Column (min): 800 mm
  • Backwash Bed Expansion (per m/h at 20°C): 21 %
  • Specific Pressure Loss (at 15°C): 1 kPa*h/m²
  • Specific Flow Rate (max): 40 BV/h

Regeneration

  • Regeneration Concentration (NaOH): approx. 2-6 wt. %
  • Regeneration Quantity (NaOH) Co-current (min): 80 g/L resin
  • Regeneration Quantity (NaOH) Counter-current (min): 50 g/L resin
  • Regeneration Contact Time (min): 30 minutes
  • Slow Rinse (at regeneration flow rate) (min): 2 BV
  • Fast Rinse (at service flow rate) (min): 4 BV

Mechanical / Hydraulic

  • See the official PDF for exact tabulated values. (The table contains specific pressure loss and regeneration parameters that are best viewed directly.)

Storage and Handling

  • Storage Time (after delivery) (max): 2 years
  • Storage Conditions: Recommended to store above freezing point of water, under roof, in dry conditions without direct sunlight.
  • Frozen Resin: If frozen, thaw gradually at ambient temperature. Do not mechanically handle while frozen. Ensure completely thawed before handling or use. Do not accelerate thawing.
  • Safety: Observe safety data sheet. Avoid contact with strong oxidants like nitric acid, which can cause violent reactions.
  • Disposal: Dispose according to European waste nomenclature within the European Community.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.