Tóm tắt tài liệu kỹ thuật
LEWATIT® MDS 2368
PDF datasheet mirror for LEWATIT® MDS 2368 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® MDS 2368 is a food grade, macroporous, strongly acidic cation exchange resin. It is based on a styrene-divinylbenzene copolymer, is bead-shaped, and has a special bead size distribution. It is intended for use in chromatographic separation, for example, in sugar separation.
Specified Data
- Common Description: Food grade, macroporous, strongly acidic cation exchange resin
- Delivery form: Na⁺ form
- Functional group: Sulfonic acid
- Matrix: Styrenic
- Structure: Macroporous
- Appearance: Beige-gray, opaque
- Uniformity coefficient: max. 1.1
- Mean bead size (d50): 0.34-0.40 mm
- Total capacity (delivery form): min. 1.0 eq/L
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 10%): 760 g/L
- Density: approx. 1.2 g/mL
- Water retention (H⁺ form): approx. 63-68 % (by weight)
- Stability pH range: 5-14
- Stability temperature range: 1-120 °C
- Storage time (after delivery): min. 0.5 years
- Storage temperature range: -20 - +40 °C
Operation
- Operating temperature: max. 120 °C
- Operating pH range during exhaustion: 0-14
- Bed depth for single column: min. 800 mm
- Backwash bed expansion per m/h (20°C): 15 %
- Specific pressure loss (15°C): 3.5 kPa*h/m²
- Max. pressure loss during operation: 250 kPa
Regeneration
HCl Regeneration
- Concentration: approx. 4-6 wt. %
- Quantity (co-current): min. 100 g/L resin
- Quantity (counter-current): min. 55-65 g/L resin
H₂SO₄ Regeneration
- Concentration: approx. 1.5-3 wt. %
- Quantity (co-current): min. 150 g/L resin
- Quantity (counter-current): min. 90 g/L resin
NaCl Regeneration
- Concentration: approx. 8-10 wt. %
- Quantity (co-current): min. 200 g/L resin
- Quantity (counter-current): min. 100 g/L resin
Rinse Cycles
- Regeneration contact time: min. 20 minutes
- Slow rinse at regeneration flow rate: min. 2 BV
- Fast rinse at service flow rate: min. 4 BV
Safety Precautions
Strong oxidants, e.g. nitric acid, can cause violent reactions if they come into contact with ion exchange resins.
Storage
It is recommended to store ion exchange resins at temperatures above the freezing point of water, under roof, in dry conditions, and without exposure to direct sunlight. If resin becomes frozen, it should not be mechanically handled and should be left to thaw out gradually at ambient temperature. It must be completely thawed before handling or use.
Packaging
Packaging stability is limited to 24 months under recommended storage conditions. It is recommended to use the product within this timeframe, otherwise the packaging condition should be checked regularly.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.