Tóm tắt tài liệu kỹ thuật
LEWATIT® MDS 200 H
PDF datasheet mirror for LEWATIT® MDS 200 H (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
- Product Name: LEWATIT® MDS 200 H
- Common Description: Strongly acidic, gel type cation exchange resin in its H form containing fine beads of a uniform size.
- Functional group: Sulfonic acid
- Matrix: Styrenic
- Structure: Gel
- Appearance: Dark brown
Operating limits
- Stability pH range: 0-14
- Operating temperature (max): 140 °C
- Operating pH range during exhaustion: 2-14
- Max. pressure loss during operation: 250 kPa
Feed water
- Total capacity (delivery form): min. 2.3 eq/L
- Ionic conversion H+: min. 99.8 eq. %
Product water
None specified.
Electrical
None specified.
Mechanical / hydraulic
- Uniformity coefficient (max): 1.1
- Mean bead size (d50): 0.33 mm
- Bulk density for shipment (+/- 5%): 800 g/L
- Density (approx.): 1.21 g/mL
- Water retention (delivery form): 45-50 % (weight)
- Volume change (H⁺ - Na⁺) (max. approx.): -8 %
- Friability: min. 95 vol % >200 g/bead
- Bed depth for single column (min): 600 mm
- Bed depth per component in mixed bed (min): 500 mm
- Backwash bed expansion per m/h (20°C): 6 %
- Specific pressure loss (15°C): 4 kPa*h/m²
- Specific flow rate (max): 100 BV/h
Regeneration
- HCl regeneration concentration (approx.): 4-6 wt. %
- HCl regeneration quantity co-current (min): 100 g/L resin
- HCl regeneration quantity counter-current (min): 55 g/L resin
- H₂SO₄ regeneration concentration (approx.): 1.5-8 wt. %
- H₂SO₄ regeneration quantity co-current (min): 120 g/L resin
- H₂SO₄ regeneration quantity counter-current (min): 80 g/L resin
- Regeneration contact time (min.): 20 minutes
- Slow rinse at regeneration flow rate (min.): 2 BV
- Fast rinse at service flow rate (min.): 2 BV
Storage and Handling
- Storage time (after delivery) (max.): 2 years
- Storage temperature range: -20 - +40 °C
- Recommended storage: Above freezing point of water, under roof, dry, out of direct sunlight.
- Frozen resin: Allow to thaw gradually at ambient temperature. Do not mechanically handle.
- Packaging stability: Limited to 24 months under recommended storage conditions.
Safety precautions: Avoid contact with strong oxidants (e.g., nitric acid) which can cause violent reactions. Observe the Safety Data Sheet for additional information.
Disposal: Dispose according to European waste nomenclature within the European Community.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.