Tóm tắt tài liệu kỹ thuật
LEWATIT® MDS 1368 Ca / 350
PDF datasheet mirror for LEWATIT® MDS 1368 Ca / 350 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
- Product name: LEWATIT® MDS 1368 Na 350
- Common Description: Food grade, gel-type, monodisperse, strongly acidic cation exchange resin based on a styrene-divinylbenzene copolymer.
- Functional group: Sulfonic acid
- Matrix: Styrenic
- Structure: Gel
- Appearance: Light brown, transparent
- Delivery form: Na⁺
Specified Data
- Uniformity coefficient: max. 1.15
- Mean bead size (d₅₀): 0.33 - 0.39 mm
- Total capacity (H⁺ form): min. 1.8 eq/L
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 10%): 820 g/L
- Density (approx.): 1.24 g/mL
- Water retention (H⁺ form) (approx. weight %): 47-53 %
- Stability pH range: 5-14
- Stability temperature range: 1-120 °C
- Storage time (after delivery) (min.): 0.5 years
- Storage temperature range: -20 - +40 °C
Operation
- Operating temperature (max.): 120 °C
- Operating pH range during exhaustion: 0-14
- Bed depth for single column (min.): 800 mm
- Backwash bed expansion per m/h (20°C): 15 %
- Specific pressure loss (15°C): 4 kPa*h/m²
- Max. pressure loss during operation: 200 kPa
Additional Information & Regulations
- Safety precautions: Strong oxidants, e.g. nitric acid, can cause violent reactions if they come into contact with ion exchange resins.
- Toxicity: The safety data sheet must be observed.
- Disposal: In the European Community, ion exchange resins have to be disposed of according to the European waste nomenclature.
- Storage: Recommended to store at temperatures above the freezing point of water, under roof, in dry conditions without direct sunlight. If frozen, allow to thaw gradually at ambient temperature.
- Packaging: Packaging stability is limited to 24 months under recommended storage conditions.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.