Tóm tắt tài liệu kỹ thuật
LEWATIT® MDS 1269 K / 290
PDF datasheet mirror for LEWATIT® MDS 1269 K / 290 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® MDS 1269 K 290 is a food grade, gel-type, monodisperse, strongly acidic cation exchange resin. It is based on a styrene-divinylbenzene copolymer.
This product is manufactured using a 1,2-dichloroethane-free production process.
Operating limits
- Stability pH range: 5-14
- Stability temperature range: 1-120 °C
- Operating temperature (max.): 120 °C
- Operating pH range during exhaustion: 0-14
Feed water
Startup recommendations are to be observed if using for the treatment of drinking water and certain aqueous solutions.
Product water
Not specified.
Electrical
Not specified.
Mechanical / hydraulic
- Uniformity coefficient (max.): 1.15
- Mean bead size (d50): 0.26 - 0.32 mm
- Total capacity (H⁺ form) (min.): 1.5 eq/L
- Bulk density for shipment (+/- 10%): 830 g/L
- Density (approx.): 1.3 g/mL
- Water retention (H⁺ form) (approx.): 55 - 67 weight %
- Bed depth for single column (min.): 800 mm
- Backwash bed expansion (per m/h at 20°C): 15 %
- Specific pressure loss (at 15°C): 7 kPa*h/m²
- Max. pressure loss during operation: 200 kPa
Storage and Handling
- Storage temperature range: -20 - +40 °C
- Recommended storage: Above freezing point of water, under roof, in dry conditions, without direct sunlight.
- Storage time (after delivery) (min.): 0.5 years
- Packaging stability: Limited to 24 months under recommended storage conditions.
Additional Information & Regulations
- Safety precautions: Strong oxidants (e.g., nitric acid) can cause violent reactions with ion exchange resins.
- Toxicity: Consult the safety data sheet.
- Disposal: Dispose of according to European waste nomenclature.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.