Tóm tắt tài liệu kỹ thuật
LEWATIT® K 2440
PDF datasheet mirror for LEWATIT® K 2440 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
Lewatit® K 2440 is a strongly acidic, macroporous polymer-based catalyst in spherical bead form, containing sulfonic acid groups. It is ideally suited as a heterogeneous catalyst for organic reactions and for the processing of aqueous as well as organic liquids at temperatures up to 150°C.
Operating limits
- Stability temperature range: 1-150 °C
- Storage temperature range: -20 - +40 °C
Properties
- Common Description: Strongly acidic, macroporous catalyst
- Functional group: sulfonic
- Matrix: styrenic
- Structure: macroporous
- Appearance: dark, opaque
Specified Data
- Uniformity coefficient: max. 1.7
- Range of size for >90 vol% of all beads: 0.4-1.6 mm
- Effective size (d10): 0.56-0.66 mm
- Total capacity (dry resin): min. 5.4 eq/kg
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 5%): 570 g/L
- Density: approx. 1.12 g/mL
- Water retention (delivery form): approx. 2 weight %
- Surface BET: approx. 30 m²/g
- Pore volume: approx. 0.4 cm³/g
- Pore diameter: approx. 53 nm
Additional Information & Regulations
- Safety precautions: Strong oxidants, e.g. nitric acid, can cause violent reactions if they come into contact with ion exchange resins.
- Toxicity: The safety data sheet must be observed.
- Storage: Recommended to store above the freezing point of water, under roof in dry conditions without direct sunlight. If frozen, thaw gradually at ambient temperature before handling or use.
- Packaging: Packaging stability is limited to 24 months under recommended storage conditions. Use within this timeframe or check packaging condition regularly.
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.