Tóm tắt tài liệu kỹ thuật
LEWATIT® K 6462
PDF datasheet mirror for LEWATIT® K 6462 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product Identification
Lewatit® K 6462 is a strongly basic, gelular anion exchange resin with uniform size beads (monodisperse) based on a styrene-divinylbenzene copolymer.
Applications:
- Hydrometallurgical processes, e.g. uranium extraction.
- Chemicals processing: extraction and recovery of anionic heavy metal complexes.
Physical and Chemical Properties
- Ionic form as shipped: Cl⁻
- Functional group: Quaternary amine, type I
- Matrix: Crosslinked polystyrene
- Structure: Gel type beads
- Appearance: Yellow, translucent
Key Properties:
- Total capacity: min. 1.4 eq/l
- Uniformity Coefficient: max. 1.1
- Mean bead size: 0.5 (± 0.05) mm
- Bulk density: approx. 650 g/l (± 5 %)
- Density: approx. 1.08 g/ml
- Water retention: 45 - 50 wt. %
- Volume change (Cl⁻ → OH⁻): max. 22 vol. %
- Stability (pH range): 0 - 14
- Storability (years): max. 2
- Storability (temperature range): -20 to 40 °C
Storage and Handling
- Recommended storage conditions: above freezing point of water, under roof, dry, and out of direct sunlight.
- If the resin freezes, allow it to thaw gradually at ambient temperature before handling or use. Do not accelerate thawing.
- Avoid contact with strong oxidants such as nitric acid, which can cause violent reactions.
- Observe the safety data sheet for additional information on transport, storage, handling, safety, and ecology.
- Disposal should comply with the European waste nomenclature.
Disclaimer
This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.