Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® K 2431

PDF datasheet mirror for LEWATIT® K 2431 (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product identification

Lewatit® K 2431 is a strongly acidic, macroporous, polymer-based ion exchange resin with sulfonic acid groups. It is supplied in spherical bead form.

Applications

Lewatit® K 2431 is designed for:

  • Phenol alkylation with olefins
  • Esterifications and etherifications
  • Condensation reactions
  • Alkylation of larger polar and non-polar molecules
  • Purification of phenol

Properties

Common Description

  • Delivery form: H⁺
  • Functional group: Sulfonic
  • Matrix: Styrenic
  • Structure: Macroporous
  • Appearance: Beige, opaque

Specified Data

  • Uniformity coefficient: max. 1.7
  • Range of size for >90 vol% of all beads: 0.5-1.6 mm
  • Effective size: 0.56-0.66 mm
  • Total capacity (delivery form): min. 1.2 eq/L

Typical Physical and Chemical Properties

  • Bulk density for shipment (+/- 5%): 700 g/L
  • Density: approx. 1.14 g/mL
  • Water retention (delivery form): approx. 63-68 % by weight
  • Stability temperature range: 1-130 °C
  • Storage temperature range: -20 - +40 °C
  • Surface BET: approx. 25 m²/g
  • Pore volume: approx. 0.35 cm³/g
  • Pore diameter: approx. 40 nm

Operating Parameters

  • Operating temperature (max.): 130 °C
  • Operating pH range during exhaustion: 0-14
  • Bed depth for single column (min.): 1000 mm
  • Max. pressure loss during operation: 250 kPa

Storage and Handling

  • Storage Temperature: Recommended to store above the freezing point of water, under roof, in dry conditions, and out of direct sunlight.
  • Frozen Resin: If frozen, allow to thaw gradually at ambient temperature; do not handle mechanically. Thawing must be complete before handling or use. Do not accelerate thawing.
  • Packaging Stability: Limited to 24 months under recommended storage conditions. Use product within this timeframe or check packaging condition regularly.
  • Safety: Observe Safety Data Sheet. Avoid contact with strong oxidants like nitric acid.
  • Disposal: Dispose according to European Community Ion Exchange Resins waste nomenclature.

Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.