Quay lại Lanxess LEWATIT
Lanxess logo

Tóm tắt tài liệu kỹ thuật

LEWATIT® CNP LF Na Ag

PDF datasheet mirror for LEWATIT® CNP LF Na Ag (Lanxess LEWATIT). Verify with OEM before design.

Summary

Product identification

Lewatit® CNP LF Na is a food-grade, weakly acidic, macroporous cation exchange resin based on crosslinked polyacrylate. It is bead-shaped with a special bead size distribution.

Application

Lewatit® CNP LF Na is suitable for the decarbonisation and softening of drinking water in household filter systems, especially cartridges.

General Description

  • Ionic form as shipped: H⁺ / Na⁺
  • Functional group: carboxylic acid
  • Matrix: crosslinked polyacrylate
  • Structure: macroporous
  • Appearance: yellow, opaque

Physical and Chemical Properties

  • Total capacity (H-Form): min. 4.3 eq/l
  • Uniformity Coefficient: max. 1.8
  • Bead size (> 90 %): 0.315 - 1.6 mm
  • Effective size: 0.48 (± 0.05) mm
  • Bulk density (± 5 %): 760 g/l
  • Density (approx.): 1.19 g/ml
  • Water retention: 48 - 56 wt. %
  • Volume change (H/Na → Ca): max. 2 - 3 vol. %
  • Stability (pH-range): 0 - 14

Storage and Handling

  • Storability: max. 6 months
  • Storability temperature range: -20 to 40 °C
  • It is recommended to store ion exchange resins at temperatures above the freezing point of water, under roof, in dry conditions, and without exposure to direct sunlight.
  • If resin becomes frozen, it should be left to thaw gradually at ambient temperature and not handled mechanically.
  • Do not attempt to accelerate the thawing process.
  • Strong oxidants (e.g., nitric acid) can cause violent reactions.
  • Observe the safety data sheet for additional information.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.