Tóm tắt tài liệu kỹ thuật
LEWATIT® C 249
PDF datasheet mirror for LEWATIT® C 249 (Lanxess LEWATIT). Verify with OEM before design.
Summary
Product identification
- Product Name: Lewatit® C 249
- Description: Premium grade, standard cross-linked, gel, strong acid cation exchange resin based on a styrene/DVB polymer.
- Intended Use: Industrial water treatment applications, including demineralization and softening. Can be used in single bed and mixed bed applications.
- Delivery Form: Sodium form.
- Alternative (Hydrogen form): Lewatit® C 267
Specified Data
- Uniformity coefficient: max. 1.6
- Range of size for >90 vol% of all beads: 0.4 - 1.25 mm
- Effective size (d10): 0.50 (+-0.06) mm
- Total capacity (delivery form): min. 2.0 eq/L
Typical Physical and Chemical Properties
- Bulk density for shipment (+/- 5%): 830 g/L
- Density (approx.): 1.26 g/mL
- Water retention (delivery form, approx. weight %): 45-48%
- Volume change (Na⁺ - H⁺) (max. approx.): 10%
- Matrix: Styrenic
- Structure: Gel
- Appearance: Brown, black
- Functional group: Sulfonic acid
Operating Limits
- Stability pH range: 0-14
- Operating temperature (max.): 140 °C
- Operating pH range during exhaustion: 2-14
- Bed depth for single column (min.): 800 mm
- Backwash bed expansion per m/h (20°C): 4.5 %
- Specific pressure loss (15°C): 1 kPa*h/m²
- Max. pressure loss during operation: 150 kPa
- Specific flow rate (max.): 50 BV/h
Regeneration
- HCl regeneration concentration (approx. wt. %): 4-6%
- HCl regeneration quantity co-current (min. g/L resin): 100 g/L
- HCl regeneration quantity counter-current (min. g/L resin): 55 g/L
- H₂SO₄ regeneration concentration (approx. wt. %): 1.5-8%
- H₂SO₄ regeneration quantity co-current (min. g/L resin): 120 g/L
- H₂SO₄ regeneration quantity counter-current (min. g/L resin): 80 g/L
- Regeneration contact time (min.): 20 minutes
- Slow rinse at regeneration flow rate (min.): 2 BV
- Fast rinse at service flow rate (min.): 2 BV
Storage
- Storage time (after delivery, max.): 2 years
- Storage temperature range: -20 - +40 °C
- Recommended Storage Conditions: Store under roof in dry conditions without exposure to direct sunlight, at temperatures above the freezing point of water.
- Frozen Resin Handling: Allow to thaw gradually at ambient temperature. Do not mechanically handle while frozen.
- Packaging Stability: Limited to 24 months under recommended storage conditions.
Safety and Disposal
- Safety Precautions: Avoid contact with strong oxidants (e.g., nitric acid) as violent reactions may occur. Consult the Safety Data Sheet for detailed information.
- Disposal: Dispose of according to European Waste Nomenclature within the European Community.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.