Quay lại DuPont
DuPont logo

Tóm tắt tài liệu kỹ thuật

Dowex 88

PDF datasheet mirror for Dowex 88 (DuPont). Verify with OEM before design.

Summary

Product identification

  • Product: DOWEX™ 88
  • Type: Strong acid cation
  • Matrix: Styrene-DVB, macroporous
  • Functional group: Sulfonate
  • Trademark: DOWEX™

Typical Physical and Chemical Properties

  • Ionic form as produced: Na⁺
  • Total exchange capacity, min.: 1.8 eq/L
  • Water content: 42 - 48 %
  • Bead size distribution:
    • Range: 300 - 1,200 µm
    • 1,200 µm (> 16 mesh): < 5 %

    • < 420 µm (< 40 mesh): < 5 %
  • Total swelling (Na⁺ → H⁺): 5 %
  • Whole uncracked beads, min.: 95 %
  • Particle density, approx.: 1.2 g/mL
  • Shipping weight, approx.: 800 g/L (50 lbs/ft³)

Recommended Operating Conditions

  • Maximum operating temperature (H⁺ form): 150°C (300°F)
  • pH range: 0 - 14
  • Bed depth, min.: 91 cm (3 ft)
  • Flow rates:
    • Service: 2 - 4 bed volumes/hour
    • Backwash: See Figure 1
    • Regeneration time: 30 - 45 min.
    • Displacement rinse: 30 - 45 min.
    • Fast rinse (if applicable): 2 - 10 bed volumes/hour
  • Total rinse requirement: 3 - 6 bed volumes
  • Regenerant:
    • Concentration: 5 - 7% HCl
    • Level, 100% basis†: 6 - 7 lbs/ft³ (96 - 112 kg/m³)
    • Temperature, max.: 93°C (200°F)

† Regeneration level may be lower for counter-current regeneration systems.

Typical Properties and Applications

DOWEX 88 resin is a macroporous strong acid cation resin for use in deashing, softening and demineralization. This macroporous matrix provides excellent mechanical strength and good operating capacity.

Packaging

  • 25 liter bags
  • 5 cubic feet fiber drums
  • 1 cubic meter super sacks

Disclaimer

Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.