Tóm tắt tài liệu kỹ thuật
AmberTec UP9700
PDF datasheet mirror for AmberTec UP9700 (DuPont). Verify with OEM before design.
Summary
Product identification
- Product Name: DuPont™ AmberTec™ UP9700 Ion Exchange Resin
- Description: Semiconductor Grade macroporous weak base anion exchange resin for demineralization applications.
- Matrix: Macroporous
- Copolymer: Styrene-divinylbenzene
- Type: Weak base anion
- Functional Group: Tertiary amine
- Physical Form: Off-white, opaque, spherical beads
- Ionic Form as Shipped: Free base (FB)
Applications
- Demineralization, ideally when treating water with:
- High organic fouling potential
- High percentage of mineral acidity (FMA)
- Partial demineralization when weak acid removal is not required
System Designs
- Co-current
- Counter-current / Hold-down
- Layered beds
Typical Properties
- Total Exchange Capacity: ≥ 1.3 eq/L
- Water Retention Capacity: 59.0 – 65.0%
- Particle Size:
- Particle Diameter: 630 - 830 µm
- Uniformity Coefficient: ≤ 1.3
- Fines (< 300 µm): ≤ 0.1%
- Oversize (> 1180 µm): ≤ 1.0%
- Stability:
- Swelling (FB → HCl): ≤ 15%
- Density:
- Shipping Weight: 670 g/L
Suggested Operating Conditions
- Temperature Range (FB form): 5 – 60°C (41 – 140°F)
- pH Range:
- Service Cycle: 0 – 6
- Stable: 0 – 14
Hydraulic Characteristics
Estimated bed expansion and pressure drop as a function of backwash flow rate and temperature are detailed in the official PDF. These estimations are valid at the start of the service run with clean water and a well-classified bed.
- Backwash Expansion: Temperature range 10 – 60°C (50 – 140°F) (See Figure 1 in PDF)
- Pressure Drop: Temperature range 10 – 60°C (50 – 140°F) (See Figure 2 in PDF)
Quality Assurance
AmberTec™ UP9700 is tested for total organic carbon (TOC) rinse down to meet stringent ultrapure water (UPW) performance requirements. A typical rinse curve for TOC is shown in Figure 3 of the PDF.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.