Tóm tắt tài liệu kỹ thuật
AmberLyst 16 WET
PDF datasheet mirror for AmberLyst 16 WET (DuPont). Verify with OEM before design.
Summary
Product identification
- Product Name: DuPont™ AmberLyst™ 16WET Polymeric Catalyst
- Description: Industrial-grade, Strongly Acidic Catalyst. Bead-form, macroporous, sulfonic acid catalyst.
- Copolymer Matrix: Styrene-divinylbenzene
- Type: Macroporous, Strong acid cation
- Functional Group: Sulfonic acid
- Physical Form: Gray, opaque, spherical beads
Applications
- Phenol alkylation
- Phenol purification
- Esterification (acetates, acrylates, fatty acid esters)
Typical Properties
Physical Properties
- Nitrogen BET Surface Area: 30 m²/g
- Total Pore Volume: 0.20 cc/g
- Average Pore Diameter: 250 Å
Chemical Properties
- Ionic Form as Shipped: H⁺
- Concentration of Acid Sites:
- ≥ 4.80 eq/kg (Dry Weight Basis)
- ≥ 1.70 eq/L (Water-wet Basis)
- Water Retention Capacity: 52 – 58%
Particle Size
- Particle Diameter: 600 – 800 µm
- Uniformity Coefficient: ≤ 1.60
- Fines (< 300 µm): ≤ 1.0%
- Oversized (> 1180 µm): ≤ 10.0%
Shrinkage (in solvent)
- Phenol: 32%
- Dry: 52%
Density
- Shipping Weight: 780 g/L
Suggested Operating Conditions
- Maximum Operating Temperature: 130°C (265°F)
- Bed Depth, min.: 600 mm (2.0 ft)
- Pressure Drop, max.: 1 bar (15 psig) across the bed
- Flowrates (Linear Hourly Space Velocity - LHSV): 0.5 – 5 h⁻¹
- Backwash: See Figure 1 (in original document)
Hydraulic Characteristics
Estimated bed expansion and pressure drop as a function of backwash flowrate, temperature, and service flowrate are shown in Figures 1 and 2 of the original document. These pressure drop expectations are valid at the start of the service run with clean water and a well-classified bed.
Disclaimer: This extracted summary may not include all figures, footnotes, or revisions. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.