Tóm tắt tài liệu kỹ thuật
AmberLite MB6113 OH
PDF datasheet mirror for AmberLite MB6113 OH (DuPont). Verify with OEM before design.
Summary
Product Identification
AmberLite™ MB6113 H/OH Ion Exchange Resin is a dyed mixture of strong acid cation and strong base anion exchange resins. It is a fully regenerated, ready-to-use, non-regenerable, pre-mixed resin developed for the production of high-purity water. It is designed for full demineralization of water and features a color indicator for resin exhaustion.
Typical Properties
Physical Properties
- Copolymer Matrix: Styrene-divinylbenzene
- Matrix Type: Gel
- Resin Type: Strong acid cation and Strong base anion, Type I
- Functional Group: Sulfonic acid (Cation) / Trimethylammonium (Anion)
- Physical Form: Translucent, spherical beads
- Color: Blue-green (as delivered) to Amber-yellow (exhausted)
- Volume Ratio (Cation:Anion): 37 – 46% : 63 – 54%
- Ionic Form as Shipped: H⁺ (Cation) / OH⁻ (Anion)
- Stability (Whole Beads): ≥ 90%
- Density (Shipping Weight): 700 g/L
Product Performance
- Operating Capacity: Estimated by formula relating bed volume (BV), total dissolved solids (TDS), and treated water volume. See the official PDF for the formula.
- Treated Water Quality: Provides demineralized water with conductivity < 1 µS/cm and neutral pH.
Suggested Operating Conditions
- Temperature Range: 5 – 60°C (41 – 140°F)
Hydraulic Characteristics
- Pressure drop is estimated as a function of service flowrate and temperature, as shown in Figure 1 in the official PDF. These expectations are valid at the start of the service run with clean water and a well-classified bed.
Disclaimer
This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.