Tóm tắt tài liệu kỹ thuật
Series 930 - 935
Engineering summary from PDF text extraction for Series 930 - 935. Verify every value with the OEM datasheet.
Summary
Product identification
- Product line: AQL Ozone family
- Series: 930 | 935 Transmitter & Controller
- Specific model mentioned: Series 935 Ozone Monitor with temperature & humidity sensor
Features
- Active sampling for higher accuracy
- Tamperproof & water resistant enclosure
- Multiple analog & digital outputs
- Real-time network capability
- Large LED local display option
- Temperature & humidity sensor (S935)
- PC data logging & networking option
Applications
- Aggressive ambient environments
- Gas alarm & control applications
- Indoor air quality monitoring
- Real-time network monitoring
Ozone Sensor Heads
| Sensor Head | Calibrated Range | Maximum Exposure | Lowest Detection Limit | Accuracy of Calibration | Resolution | Response Time (T90) |
|---|---|---|---|---|---|---|
| Ultra low | 0 - 0.150 ppm | 0.25 ppm | 1 ppb | <± 0.005 ppm | 0.001 ppm | < 70 s |
| Low | 0 - 0.5 ppm | 1.0 ppm | 1 ppb | <± 0.008 < 0.1 ppm; <± 10% 0.1 - 0.5 ppm | 0.001 ppm | < 60 s |
| High | 0.5 - 20 ppm | 25 ppm | 10 ppb | <± 10% 0.2 - 2 ppm; <± 15% 2 - 20 ppm | 0.01 ppm | < 60 s |
Operating Conditions
- Temperature: -5°C to 40°C
- Humidity: 5 to 95% RH (non-condensating)
Electrical
- Power: 24VDC, 500mA (range 22-26 VDC) - user supplied
- Analogue output: 4-20mA (opto-isolated), 12-24 V
- Communication: RS485 (Aeroqual proprietary protocol)
- Jumpers J1, J2, J3 for termination resistors
- ID: 1 (Default), User configurable from 1 - 255
Mechanical / hydraulic
- Removable & replaceable sensor head: Yes
- Temperature & humidity sensor (Series 935):
- Temperature Range: -40°C to 124°C (-40°F to 255°F)
- Humidity Range: 0 to 100% RH
- Enclosure rating: IP41 & NEMA 2 equivalent
- Enclosure casing: Fibre reinforced polycarbonate
- Enclosure size: 180W x 110H x 90D (mm); 7⅛W x 4¾H x 3½D (in)
- Weight: < 850 g; < 30 oz
Other features
- External signal type: Transistor output
- External signals (4): Low Alarm | High Alarm | Control | Diagnostics
- LED Display: Optional
- Inputs: Standby toggle
- Alarm set points (2): User configurable
- Control set point: User configurable
- Software (standard): PC Configuration Program CD
- Software (optional): PC Data Logging & Networking CD (code: R60)
- Approvals: Part 15 of FCC Rules, EN 50082-1: 1997, EN 50081-1: 1992
Disclaimer: This extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.