
Tóm tắt tài liệu kỹ thuật
CC3020
Engineering summary from PDF text extraction for CC3020. Verify every value with the OEM datasheet.
Summary
Product identification
- Unit Type: CC3020
- Description: Controller for Conductivity measurement
- Functionality: Automatic monitoring of conductivity and initiating regeneration via an external device.
Features
User Interface
- Monochrome LCD display (16x2 characters)
- Control via three internal keys
- Supports English, French, German, and Dutch languages
Inputs
- 3x Inputs for potential-free switch
- 1x Conductivity meter input
Conductivity Meter
- Automatic range switching
- Supports cell constants from 0.01 - 10.00 cm⁻¹
- Measurement range from 0.5 - 100,000 µS/cm (depending on the used cell)
- Manual temperature compensation
- Uses a capacitive cell
Outputs
- 3x Relay outputs (powered)
Memory
- Programming configuration is stored in non-volatile memory, unaffected by power loss.
Enclosure
- Suitable for wall mounting
- IP65 rated
Power Supply Options
- 24 VAC input / 24 VAC output
- 115 VAC input / 115 VAC output
- 230 VAC input / 230 VAC output
- 12 VDC input / 12 VDC output
- 24 VDC input / 24 VDC output
Function Table
Relay Outputs
- Flush valve
- Regeneration start
- Alarm
Digital Inputs
- Regeneration busy
- Alarm reset
Ordering Information
The CC3020 controller is ordered with a specific power supply:
- 24V (24 VAC / 24 VAC)
- 115V (115 VAC / 115 VAC)
- 230V (230 VAC / 230 VAC)
- 12VDC (12 VDC / 12 VDC)
- 24VDC (24 VDC / 24 VDC)
Disclaimer This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.