
Tóm tắt tài liệu kỹ thuật
Omnigrad TA555
Engineering summary from PDF text extraction for Omnigrad TA555. Verify every value with the OEM datasheet.
Summary
Product identification
- Product: omnigrad TA555
- Type: Industrial protecting tube, Heavy duty - General purpose
- Standard Reference: ME U 819.04 - type 6
- Description: Thermowell manufactured from round bar stock (drilled).
Application
Designed for use with resistance and thermocouple thermometers, mainly in heavy duty applications.
Technical data
- Construction: Round bar stock
- Extension O.D.: 34 mm
- Immersion O.D.: < 28 mm
- Standard extension length (T): 75 mm
- Standard bore diameter: 6.5 mm, 7 mm, or 8 mm
- Standard material: AISI316/W.1.4401, AISI316L/W.1.4404
Connection to thermometer
- Threaded: 1/2" NPT - female
Process connection
- Type: Threaded or flanged weld
- Thread: 1" NPT
- Flange type: ANSI slip-on
- Flange material: AISI 316 or A 105
- Flange mounting: threaded and back welded - 3x3 mm wide
Stem and tip
- Stem shape: Straight or conical
- Standard bottom thickness: 5 mm
Surface finishing
- Finishing: Refer to the order key. Available finishes include 1.6 micron and 0.8 micron.
Order key
The TA555 order key specifies various parameters, including:
- Extension length
- Immersion length
- Thermowell material (SS316 / 1.4401 or SS316L / 1.4404)
- Immersion length finishing
- Process connection type (e.g., various ANSI slip-on flanges)
- Flange finishing
- Thermowell bore diameter and taper
- Plug and chain options
- Markings
Notes from order key:
- Minimum wall thickness is 3 mm.
- Nominal length A (Total length) is 135 mm to 1000 mm.
Diagrammatic representation:
The document includes diagrams illustrating dimensions such as Ø 34, Ø Q1, Ø Q2, Ø A1, Ø A2, U (immersion length), T (extension length), and R (taper).
Supplementary Documentation
- Technical Information Industrial Protecting Tubes (TI138T/02/en)
- TI154T/02/en/05.01
- FM+SGML 6.0 No. 71108022
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.