Quay lại Endress + Hauser temperature measurement
Endress+Hauser logo

Tóm tắt tài liệu kỹ thuật

iTherm Moduline TM111

Engineering summary from PDF text extraction for iTherm Moduline TM111. Verify every value with the OEM datasheet.

Summary

Product identification

The iTHERM ModuLine TM111 is an innovative, robust, and modular thermometer designed for direct installation without a thermowell, suitable for a wide range of industrial applications.

Operating limits

  • Measuring range: –200 to +1 100 °C (–328 to +2 012 °F)
  • Pressure range: Up to 75 bar (1 088 psi) to +200 °C (+392 °F) for standard thin-film and iTHERM QuickSens Pt100 sensors. For other sensor types, up to 50 bar (725 psi) to +400 °C (+752 °F).

Feed water

Not specified in the provided text.

Product water

Not specified in the provided text.

Electrical

  • Output and communication protocols:
    • Analog output 4 to 20 mA, HART®
    • HART® SIL transmitter (optional)
    • PROFIBUS® PA, FOUNDATION™ Fieldbus™
    • PROFINET® with Ethernet-APL
    • IO-Link®
  • Power supply: Details vary based on the transmitter type. Typically supplied via the 2-wire loop or fieldbus connection.

Mechanical / hydraulic

  • Installation: Designed for direct installation without a thermowell.
  • Response time:
    • Standard Pt100 (direct contact, 3 or 6 mm diameter): t50 = 5 s, t90 = 11 s
    • iTHERM QuickSens (direct contact): t50 = 0.5 s, t90 = 1.5 s
    • Type J, K, N (TC) (direct contact, 3 or 6 mm diameter): t50 = 2.5 s, t90 = 7 s
  • Vibration resistance:
    • iTHERM StrongSens Pt100 (TF): ≤ 600 m/s² (60g)
    • iTHERM QuickSens Pt100 (TF) (⌀6 mm): ≤ 600 m/s² (60g)
    • iTHERM QuickSens Pt100 (TF) (⌀3 mm): ≤ 30 m/s² (3g)
    • Other types range from ≤ 30 m/s² (3g) to ≤ 40 m/s² (4g).
  • Weight: 0.5 to 2.5 kg (1 to 5.5 lbs) for standard options.
  • Materials: Common materials include AISI 316/1.4401 and AISI 316L/1.4404, with recommended maximum continuous use temperatures up to 650 °C (1 202 °F).

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.