Quay lại Endress + Hauser Flow measurement
Endress+Hauser logo

Tóm tắt tài liệu kỹ thuật

Dosimag-5BH

PDF datasheet mirror for Dosimag-5BH (Endress + Hauser Flow measurement). Verify with OEM before design.

Summary

Product identification

  • Product Name: Dosimag / 5BH
  • Product Headline: Flowmeter with hygienic design, highest repeatability and an ultra-compact sensor. For demanding dosing and filling applications.
  • Measuring Principle: Electromagnetic

Field of application

Specially designed for filling and bottling applications of conductive liquids. Measures volume directly. Designed for applications where space is a premium.

Sensor features

  • High measuring accuracy and repeatability in shortest filling time.
  • Energy-saving flow measurement – no pressure loss due to cross-section constriction.
  • Maintenance-free – no moving parts.
  • CIP, SIP cleanable.
  • Measuring device conform to FDA.

Transmitter features

  • Versatile and time-saving wiring – plug connector.
  • Industry-optimized – ultra-compact design.
  • For hygienic requirements – stainless steel housing.
  • Pulse/frequency/switch output, Modbus RS485.
  • Custody transfer approvals (MID, NTEP).
  • Excellent, easily cleanable transmitter.

Operating limits

  • Max. process pressure: PN 16
  • Medium temperature range:
    • Seal material EPDM: –20 to +130 °C (–4 to +266 °F)
    • Seal material Silicone: –20 to +130 °C (–4 to +266 °F)
    • Seal material Viton: 0 to +150 °C (+32 to +302 °F)
  • Ambient temperature range: –40 to +60 °C (–40 to +140 °F)

Feed water

  • Liquids: Conductive liquids

Product water

  • Measured variables: Volume flow

Performance

  • Max. measurement error:
    • ±0.25 % o.r. ± 1 to 4 m/s (3.3 to 13 ft/s)
    • ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
    • ±5 % o.r.
  • Measuring range: 0.14 to 1.66 l/s (0.035 to 0.44 gal/s)

Mechanical / hydraulic

  • Nominal diameter range: DN 4 (⁵⁄₃₂"), 8 (⁵⁄₁₆"), 15 (½"), 25 (1")
  • Wetted materials:
    • Liner: PFA
    • Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022), Tantalum, Platinum
  • Sensor housing material: 1.4308 (304)
  • Transmitter housing material: 1.4308 (304)
  • Degree of protection: IP66/67, type 4X enclosure

Electrical

  • Outputs: Pulse/frequency/switch output (passive)
  • Inputs: None
  • Digital communication: Modbus RS485
  • Power supply: DC 20 to 30 V

Approvals and certifications

  • Hazardous area approvals: ATEX, IECEx, cCSAus
  • Metrological approvals: MID, NTEP
  • Hygienic approvals: 3-A, EHEDG, seals acc. to FDA
  • Material certificates: 3.1 material
  • Product safety: CE
  • Calibration: Performed on accredited calibration facilities (acc. to ISO/IEC 17025)

Display / Operation

  • No local Operation
  • Configuration via operating tools possible

Disclaimer: This extracted summary may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.