Quay lại Bel Pressure Vessels
BEL logo

Tóm tắt tài liệu kỹ thuật

9-S-300

Engineering summary from PDF text extraction for 9-S-300. Verify every value with the OEM datasheet.

Summary

Product identification

  • Model: BEL 9-S(2x1.5")-300
  • Type: Pressure Vessel

Operating limits

  • Max. allowable working pressure: 300 psi (20.7 bar)
  • Permeate internal pressure not to exceed: 232 psi (16 bar)
  • Operating temperature not to exceed: 49°C (120°F)

Warning: Never pressurize a pressure vessel that was not loaded with membrane elements.

Mechanical / Hydraulic

  • Drawing Unit: mm (inches)
  • Body Diameter: 245 mm [9.65 inches]
  • Port Diameter: 45 mm [1.77 inches]
  • Peak Bell Diameter: 276 mm
  • Feed/Concentrate Port: 1.5" Victaulic
  • Permeate Port: 2" Victaulic
  • Screw Hex Head: DIN 933 or DIN EN 24017 M8x70
  • Maximum Feed Dimension: 10 mm [0.4 inches]
  • Other Dimensions: 4 mm [0.158 inches] (TYPx2)
  • Membrane Elements: Length corresponds to a 60" element, but can be varied according to exact membrane type.
  • Supports: 3 supports required for length code - 4 and over. Supports can be shimmed if required.
  • Accessories: The vessel is supplied with two strap assemblies.

Note: All dimensions are for reference only, not for construction unless certified.


Disclaimer: This summary is generated from an extracted text and may not include all figures, footnotes, or revisions present in the complete OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.