Quay lại Bel Pressure Vessels
BEL logo

Tóm tắt tài liệu kỹ thuật

8-E-300-1M-to-8M R6 non code

Engineering summary from PDF text extraction for 8-E-300-1M-to-8M R6 non code. Verify every value with the OEM datasheet.

Summary

Product identification

This document describes the BEL8-E-300 RO Pressure Vessel, which is an 8-inch end port pressure vessel designed to house 1 to 8 membrane elements.

Operating limits

  • Max. allowable working pressure: Not to exceed 300 psi (20.7 bar)
  • Permeate internal pressure: Not to exceed 125 psi (8.6 bar)
  • Operating temperature: Not to exceed 49 °C (120 °F)

Mechanical / hydraulic

  • Feed/Concentrate Port: 1.5" VICTAULIC
  • Permeate Port: 1.25" BSP-MALE
  • Body Diameter: 45 mm (1.77 in)
  • Screw Hex Head: DIN 933 or DIN EN 24017 M8x70
  • Supports: 3 supports required for length code - 4 and over.
  • The vessel is supplied with two strap assembly.
  • Drawing units are in mm (inches).

Warnings and Notes

  • Never pressurize a pressure vessel that was not loaded with membrane elements.
  • All dimensions are for reference only, not for construction unless certified.
  • Saddles can be shimmed if required.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF. Contractual data must always match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.