
Tóm tắt tài liệu kỹ thuật
4-S-600-1M-6M
Engineering summary from PDF text extraction for 4-S-600-1M-6M. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: BEL 4-(Sx1")-600 psi.
- Model: BEL 4-S-600
- Type: RO Pressure Vessel
Operating limits
- Max. allowable working pressure: 600 psi (41.4 bar)
- Permeate internal pressure: 125 psi (8.6 bar)
- Operating temperature: 49 °C (120 °F)
Mechanical / hydraulic
- Body Diameter: 118 mm [4.65 in]
- Peak Bell Diameter: 146 mm [5.75 in]
- Feed/Concentrate port: 1" victaulic
- Permeate port: 1/2" NPT - male
- Supports: 3 supports required for length code - 4, 28 and over.
- Included: The vessel is supplied with two strap assembly.
- Referenced Membrane Lengths: 21" (533.4 mm) and 40" (1016 mm) (See the official PDF for exact tabulated values).
Warnings and Notes
- Never pressurize a pressure vessel that was not loaded with membrane elements.
- All dimensions are for reference only, not for construction unless certified.
- Drawing units are mm (inches).
- Saddles can be shimmed if required.
- Do not scale drawing.
Disclaimer: This summary is based on the provided text extract. The original OEM PDF may contain figures, footnotes, and revisions not present here. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.