
Tóm tắt tài liệu kỹ thuật
BEL4 E 450 1M & 2M L
Engineering summary from PDF text extraction for BEL4 E 450 1M & 2M L. Verify every value with the OEM datasheet.
Summary
Product identification
- RO Pressure Vessel BEL 4-E-450
- Designed for 1 & 2 membrane elements.
- Drawing No.: BEL4-E-450-1&2-sh-ne
Operating limits
- Max. allowable working pressure: 450 psi (31 bar)
- Permeate internal pressure: 125 psi (8.6 bar)
- Operating temperature: 49 °C (120 °F)
Mechanical / hydraulic
- Dimensions:
- Body Diameter: Ⱦ118 mm [4.65 in]
- Other reference dimensions include Ⱦ102 mm [4.02 in], 30.5 mm [1.2 in], 64 mm [2.52 in], 110 mm [4.33 in], 34 mm [1.33 in] (TYPx2), 40 mm [1.58 in], and 145 mm [5.7 in].
- The overall length (L) depends on the membrane elements. Supported membrane lengths are 40" (1016 mm) and 21" (533.4 mm). See the official PDF for exact tabulated values for 'L'.
- Ports:
- FEED/CONC. PORT: 1/2" NPT-FEMALE
- PERMEATE PORT: 1/2" NPT-FEMALE
- Fasteners: SCREW HEX HEAD DIN 933 OR DIN EN 24017 M8x50
Notes
- All dimensions are for reference only, not for construction unless certified.
- Items 7 & 8 are optional, delivered upon request, and priced separately.
- Drawing unit: mm (inches).
- Saddles can be shimmed if required.
- Do not scale drawing; it may be reprinted on any paper size or copied.
Warnings
- Never pressurize a pressure vessel that was not loaded with membrane elements.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.