Tóm tắt tài liệu kỹ thuật
SP Series 2 x 6
Engineering summary from PDF text extraction for SP Series 2 x 6. Verify every value with the OEM datasheet.
Summary
Product Identification
The 3M™ Liqui-Cel™ SP-2x6 Series Membrane Contactor is a membrane contactor designed for gas/liquid contacting applications.
Dimensions
- Overall Length: 143 mm (5.6 in)
- Diameter: 56 mm (2.2 in)
- All dimensions are nominal values.
Membrane Characteristics
- Cartridge Configuration: No Baffle Radial Flow
- Membrane/Potting Material: Polyolefin / Polyethylene
- Membrane Type:
- UP Series: Recommended for low surface tension liquids that are water-based.
- UP II Series: Recommended for low surface tension fluids with aggressive formulations.
Mechanical / Hydraulic
- Liquid Flow Guidelines: 100 ml/min – 1 liter/min (Liquid must flow on the shellside)
- Housing Material: Polyethylene
- Connections:
- Shellside (Liquid Inlet/Outlet): 1/4 inch NPT Female
- Lumenside (vacuum): 1/4 inch NPT Female
- Priming Volume (approximate):
- Shellside: 77 ml
- Weight (approximate):
- Dry (UP Series / UP II Series): 140 grams
- Water-filled (shellside-water): 220 grams
Operating Limits
- Maximum Shellside LIQUID Working Temperature/Pressure:
- UP Series:
- 5-25°C: 4.1 barg (60 psig)
- 50°C: 1.0 barg (15 psig)
- UP II Series:
- 5-25°C: 7.2 barg (105 psig)
- 75°C: 1.0 barg (15 psig)
- UP Series:
- Note: Liquid pressure should always exceed gas pressure. If no vacuum is used, 1.0 barg (15 psig) can be added to the pressures above.
Regulatory
- Complies with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
- Constructed of FDA CFR title 21 compliant materials for wetted parts only at ambient temperatures.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the official OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.