Quay lại 3M-Liqui-Cel® Membrane Contactors
3M logo

Tóm tắt tài liệu kỹ thuật

MM Series 0.75 x 1

Engineering summary from PDF text extraction for MM Series 0.75 x 1. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product: 3M™ Liqui-Cel™ MM-0.75x1 Series Membrane Contactor
  • Membrane Characteristics:
    • Cartridge Configuration: No Baffle Membrane Disc Design
    • Membrane Type: X40 Fiber
    • Membrane/Potting Material: Polypropylene / Epoxy
  • Housing Characteristics:
    • Material: Polycarbonate
    • Connections:
      • Shellside (Liquid Inlet/Outlet): 3/8 inch Straight Tube
      • Lumenside (vacuum): 1/4 inch Straight Tube
    • Weight (approximate):
      • Dry (cartridge and housing): 16 grams
      • Water-filled (shellside): 22 grams
    • Mounting: Horizontal with vacuum port pointed down

Operating limits

  • Liquid Flow Guidelines: 15 - 200 ml/min
  • Maximum Shellside LIQUID Working Temperature/Pressure: 5-25°C, 3.1 barg (41-77°F, 45 psig)
  • Note: Liquid pressure should always exceed gas pressure.

Mechanical / hydraulic

  • Nominal Dimensions:
    • 72 mm (2.9 in)
    • 36 mm (1.4 in)
    • 27 mm (1.1 in)
  • Priming Volume (approximate):
    • Shellside: 6.5 ml

Regulatory

  • Complies with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
  • Constructed of FDA CFR title 21 compliant materials for wetted parts only at ambient temperatures.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.