
Tóm tắt tài liệu kỹ thuật
1.5 kW
Engineering summary from PDF text extraction for 1.5 kW. Verify every value with the OEM datasheet.
Summary
Product identification
SnowPure's O-005D is a 1.5kW DC Power Supply designed for Electropure™ brand EDI modules. It is an economical, modular, air-cooled, and compact DC supply.
This unit is designed for use with:
- XL-200 Series
- XL-300 Series
- XL-400 Series
Operating limits
- Designed for continuous operation at rated output.
- Suitable for NEMA vented enclosures.
Electrical
- Output DC Voltage (Constant Voltage Mode): 0-300 VDC
- Output DC Current (Has Overcurrent Protection): 0-5 Amps DC (ADC)
- AC Input (Single phase, 50 or 60HZ): 176-264 VAC 1PH 50/60HZ
- Power: 1.5kW
- Voltage Ripple, Max: < 1%
- Power Efficiency Rating (@Full Load): > 75%
- Interlock: By dry normally open contact (flow switch/pressure switch)
- Protection:
- Over-Current (Lowers Operating Voltage): Included
- Over-Current (Shutdown/Fault): Included
- Short-Circuit (Shutdown/Fault): Included
- Over-Temperature (Standby/Fault): Included
- Cooling: Temperature Controlled Fan
- Monitor: Included
- Voltage and Current Display: Included
- Designed to Safety Standards: GB4943, UL60950, EN60950
Mechanical / hydraulic
- Dimensions (Width x Height x Length): 11.0x5.7x4.5 inches, 28.0x14.5x11.5 cm (LWH)
- Operating Weight: 14.3 lb (6.5 kg)
- Shipping Weight (approximate): 18 lb (8.2 kg)
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the OEM PDF datasheet. For contractual purposes, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.