Quay lại SnowPure EDI
SnowPure logo

Tóm tắt tài liệu kỹ thuật

1.0 kW

Engineering summary from PDF text extraction for 1.0 kW. Verify every value with the OEM datasheet.

Summary

Product identification

The O-002B is a 1.0kW DC Power Supply designed for SnowPure Electropure™ brand EDI modules.

Key characteristics include:

  • Air-cooled, compact DC supply
  • Designed for continuous operation at rated output
  • Low AC ripple
  • Electronics for constant voltage control
  • Over-current and short-circuit protection
  • Over-temperature protection
  • Suitable for NEMA vented enclosures
  • Designed for XL-060 Series and XL-100 Series EDI modules
  • Interlock by normally open dry contact (flow switch/pressure switch)

Electrical

  • Output DC Voltage (Constant Voltage Mode): 0-100 VDC
  • Output DC Current (Has Overcurrent Protection): 0-9 Amps DC (ADC)
  • AC Input (Single phase, 50 or 60HZ): 180-264 VAC 1PH 50/60HZ
  • Max Power Output: 1.0kW
  • Voltage Ripple, Max: < 1%
  • Power Efficiency Rating (@Full Load): > 75%
  • Safety Standards: Designed to GB4943, UL60950, EN60950

Protection features:

  • Over-Current (Lowers Operating Voltage): Included
  • Over-Current (Shutdown/Fault): Included
  • Short-Circuit (Shutdown/Fault): Included
  • Over-Temperature (Standby/Fault): Included

Monitoring features:

  • Monitor: Included
  • Voltage and Current Display: Included

Mechanical / hydraulic

  • Cooling: Temperature Controlled Fan
  • Dimensions (Width x Height x Length): 11.0x5.7x4.5 inches
  • Dimensions: 28.0x14.5x11.5 cm (LWH)
  • Operating Weight: 7.7 lb (3.5 kg)
  • Shipping Weight (approximate): 10 lb (4.5 kg)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.