
Tóm tắt tài liệu kỹ thuật
ProFlo SXT
Engineering summary from PDF text extraction for ProFlo SXT. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: ProFlo SXT High Performance Control Valve
- Part Number: 42803 Rev B
- Typical Applications: Water softener, Iron filter, Sediment filter, Carbon filter, Neutralizing filter (6" - 16" diameter tanks)
Operating limits
- Pressure:
- Hydrostatic: 300 psi
- Working: 20 - 125 psi
- Temperature: 34° - 110° F
Valve Specifications
- Valve material: Fiber-reinforced polymer
- Inlet/Outlet: 3/4", 1" or 1-1/4"
- Cycles: 5
- Flow Rates (50 psi Inlet) - Valve Alone:
- Continuous (15 psi drop): 21 GPM
- Peak (25 psi drop): 27 GPM
- Cv (flow at 1 psi drop): 5.4
- Max. backwash (25 psi drop): 17 GPM
- Regeneration: Downflow/Upflow, Both
- Adjustable cycles: Yes
- Time available per cycle: 199 minutes
- Meter Information:
- Meter accuracy: .75 - 15 GPM +/- 5%
- Meter capacity range: 1 - 999,900 gallons
- Distributor pilot: 1.05" O.D.
- Drain line: 1/2" NPT Quick Connect
- Injector brine system: 1610
- Brine line: 3/8"
- Mounting base: 2-1/2" - 8 NPSM
- Height from top of tank: 8"
Features
- Fully adjustable, 5-cycle control (upflow backwash, downflow brining, slow rinse, rapid rinse, brine refill, and downflow service)
- Programming ease and options increase efficiency, save salt and water
- Downflow or upflow regenerations
- Strong, durable valve body, weather-resistant enclosure
- Demand regeneration or time clock versions
- Capable of regenerating up to 16" diameter softeners and filters
- Timed brine refill with soft water
- Super capacitor for keeping time of day during power outage
Options
- Fiber-reinforced polymer or stainless steel bypass valve
- Backwash filter
- Meter-initiated regeneration
- Upflow regeneration
- Auxiliary switches
Electrical
- Electrical rating: 110 v, 220 v - 50 Hz, 60 Hz
- Max. VA: 8.4
Mechanical / hydraulic
- Estimated shipping weight:
- Time clock: 8 lbs.
- Metered valve: 9 lbs.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.