Quay lại Pentair Control Valves
Pentair logo

Tóm tắt tài liệu kỹ thuật

Fleck 2850

Engineering summary from PDF text extraction for Fleck 2850. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Line: Pentair Control Valves
  • Model: Fleck 2850 Industrial Valve

Operating specifications

  • Material: Brass
  • Hydrostatic pressure: 20 bar
  • Working pressure: 1.8 - 8.5 bar
  • Working temperature: 1 - 43 °C
  • Regeneration types: Manual, Timeclock (7 or 12 days), Meter (delayed or immediate), Electronic timer
  • Cv (Flow rate alone at 0.07 bar): 13.2 gpm

Flow rates (valve alone)

  • Continuous (Δp = 1 bar): 11.6 m³/h
  • Peak (Δp = 1.8 bar): 15 m³/h
  • Maximum backwash (Δp = 1.8 bar): 11.1 m³/h

Electrical

  • Rating: 24 V - 50 Hz (other upon request)
  • Protection index: IP 44

Mechanical / hydraulic

  • Inlet / outlet: 1 ½ inch BSP
  • Distributor tube: 50 mm (DN 40)
  • Drain line: 1 inch NPT
  • Brine line (1650): ⅜ inch
  • Brine line (1710): ½ inch
  • Mounting base - Top: 4 inches - 8 UN
  • Height (from the top of tank): 165 mm
  • Recommended tank size:
    • Water softener: 10 - 30 inches (250 - 760 mm)
    • Filters: 10 - 24 inches (250 - 610 mm)

Meter specifications

  • Accuracy range (± 5%): 5 - 283 Lpm
  • Standard capacity range: 2.5 - 40 m³
  • Extended capacity range: 12 - 200 m³

Regeneration cycles (Down flow)

  1. Backwash
  2. Brine & slow rinse
  3. Rapid rinse
  4. Brine tank refill
  5. Service

Options

  • Mounting: Side Mount adapter
  • Filter Hot Water Temperature: 65°C (meter) / 82°C (timeclock)

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.