Tóm tắt tài liệu kỹ thuật
Kleen AC9500E
Engineering summary from PDF text extraction for Kleen AC9500E. Verify every value with the OEM datasheet.
Summary
Product Identification
Kleen* AC9500E is an inhibited dry acid descaler.
Description and Use
Kleen AC9500E is a scale and deposit remover containing sulphamic acid, corrosion inhibitors, a wetting agent, and exhaustion indicators. The inhibitors are designed to prevent attack on mild steel, stainless steel, cast iron, and copper alloys during cleaning.
Treatment and Feeding Requirements
- Normal Cleaning: Dissolve Kleen AC9500E in warm water (50 to 65°C) to make a 5% solution in the system to be cleaned.
- Faster or Heavily Scaled Equipment: Use up to a 10% solution.
- Circulate the solution through the equipment to be cleaned.
- Cleaning action is enhanced when the solution is heated to 60 to 65°C.
Exhaustion Indicator:
- Freshly prepared solution: Reddish purple
- Approximately 80% used: Orange
- Exhausted: Yellow
Cleaning is complete when a reddish purple or orange solution shows no further color change in 15 minutes (hot) or 2 hours (cold).
Post-Cleaning Procedure:
- Drain the system.
- Flush with water.
- Circulate a 1 to 2% solution of an alkaline product to neutralize residual acid.
- Flush again with water.
Packaging Information
Kleen AC9500E is available in various containers and delivery methods. Contact your SUEZ sales representative for details.
Safety Precautions
A Material Safety Data Sheet (MSDS) with detailed information is available upon request.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.