Quay lại Kurita
Kurita logo

Tóm tắt tài liệu kỹ thuật

Vitec® 5200

Engineering summary from PDF text extraction for Vitec® 5200. Verify every value with the OEM datasheet.

Summary

Product identification

Vitec® 5100 is a liquid antiscalant/dispersant.

Performance

  • Powerful inhibitor against a variety of scales, including:
    • CaCO₃ (CCPP ≤ 900, LSI ≤ 2.8)
    • CaSO₄ (3.0 x Ksp)
    • BaSO₄ (10⁵ x Ksp)
    • SrSO₄ (20 x Ksp)
    • CaF₂ (1000 x Ksp)
    • SiO₂ (120 ppm)
  • Highly effective at low dose rates in a wide range of feedwater types and pH ranges.
  • Compatible with polyelectrolytes.
  • Provides both scale and inorganic fouling control.
  • Compatible with all membrane types.
  • Formulated to inhibit scale and disperse colloidal particles in cellulose acetate and polyamide membrane separation systems.
  • Certified by NSF International under ANSI/NSF Standard 60 for use in systems producing potable water.
  • Compatible with Avista’s RoQuest® organic coagulants.

Application

  • Inject upstream of the membrane system and, where possible, upstream of cartridge filters.

Dosing Guidelines

  • Typical dosage range: 2 to 5 ppm.
  • A site-specific dose can be determined using the Avista Advisor computer program.
  • Contact Avista customer service for customized dosing instructions.

Dilution

  • Product is formulated to be injected neat.
  • If dilution is required, use demineralized or RO permeate water. Softened water may be substituted if the above are unavailable.
  • Dilution should not result in a solution strength of less than 10% to protect the internal bacteriostat.

Specifications

  • Appearance: Clear, yellow liquid
  • pH (2% solution): 5.0 – 6.5
  • Specific Gravity @ 20°C: 1.10 ± 0.05

Packaging and Storage

  • Standard regional pack sizes:
    • Pails: 45 lbs (23 kgs)
    • Drums: 500 lbs (230 kgs)
    • IBC’s (totes): 2500 lbs (1100 kgs)
  • Custom packaging is available.
  • Information on drumless or bulk tanker delivery is available on request.

NSF Certification

  • Certified by NSF International to NSF/ANSI 60 for use as a drinking water treatment chemical in reverse osmosis systems at a maximum level of 13 mg/l.

Disclaimer: This data extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.