Quay lại BWA
BWA logo

Tóm tắt tài liệu kỹ thuật

Belite M8

Engineering summary from PDF text extraction for Belite M8. Verify every value with the OEM datasheet.

Summary

Product identification

Belite® M8

Description

Belite M8 is a liquid antifoam product designed for controlling foaming and priming in seawater distillation plants. Its components are approved by the US FDA as food additives.

Application

Belite M8 is used to manage unpredictable foaming in seawater distillation, particularly in multi-stage flash plants. It is formulated with an ethylene oxide/propylene oxide block copolymer. The product is not water-soluble but forms a micro-emulsion at use concentrations (0.05 - 0.1 mg/l). During evaporation, it incorporates into bubble surface films, acting as a surfactant to reduce film strength and prevent stable foam formation, thereby ensuring uniform boiling/flashing and minimizing carry-over.

Usage

Consult with a BWA Water Additives representative for optimal dosage recommendations.

Packaging / Weight

  • Drum: 440 lb (200 kg)

Physical Properties

  • Appearance: Clear to pale yellow liquid
  • Odor: Slight
  • Saponification value: 11.9 - 14.2 mg koh/g
  • Specific gravity: 0.95-1 at 20/20°C
  • Aqueous emulsion at 20/20 oC: Readily dispersible white-milk
  • Viscosity: 55-65 mm²/s at 25°C
  • Water Content: 3.5% w/w maximum

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.