Quay lại BWA
BWA logo

Tóm tắt tài liệu kỹ thuật

Belclene 400

Engineering summary from PDF text extraction for Belclene 400. Verify every value with the OEM datasheet.

Summary

Product Identification

Belclene® 400 is a multifunctional deposit control agent.

Application

Formulations with Belclene 400 provide:

  • Phosphate inhibition/dispersancy and calcium phosphonate stabilization
  • Iron oxide dispersancy
  • Zinc stabilization
  • Calcium carbonate inhibition
  • Halogen stability
  • FDA and USDA approvals

Belclene 400 can be used for general calcium phosphate and calcium carbonate fouling and as a component in phosphate, polyphosphate, phosphonate, and zinc-based water treatment formulations.

Usage

Consult with your BWA Water Additives representative for optimal dosage recommendations.

Packaging / Weight

  • Drum: 528 lb (240 kg)
  • IBCs/Totes: 2,650 lb (1,225 kg)
  • Bulk quantities are available.

Physical Properties

  • Appearance: Clear to pale yellow liquid
  • Odor: Slight
  • Solids content: 47 – 53 %w/w
  • Specific gravity: 1.24 @ 20 °C
  • pH of undiluted product: 2.5 @ 20 °C
  • Viscosity: 250 mm²/s @ 25 °C
  • Boiling point range: 103–105 °C (217–221 °F)
  • Freezing point: -12 to -3 °C (10–28 °F)
  • Theoretical phosphorus content (as P): <1%
  • Solubility in Water: Miscible
  • Solubility in Ethylene glycol: Miscible
  • Solubility in Methanol: Miscible (solution becomes turbid over the concentration range of 5-60%)
  • Solubility in 50% caustic soda: Miscible

Disclaimer: Extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.