Quay lại Avista
Avista logo

Tóm tắt tài liệu kỹ thuật

Vitec® 5200

Engineering summary from PDF text extraction for Vitec® 5200. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Name: Vitec® 5100
  • Product Type: Antiscalant/Dispersant - Liquid
  • Product Description: Liquid antiscalant/dispersant blended to inhibit scale and disperse colloidal particles in cellulose acetate and polyamide membrane separation systems.
  • Certification: Certified by NSF International under ANSI/NSF Standard 60 for use in systems producing potable water at a maximum level of 13 mg/l.
  • Compatibility: Compatible with all membrane types and Avista’s complete line of RoQuest® organic coagulants.

Performance

  • Scale Inhibition:
    • CaCO₃ (CCPP ≤900, LSI ≤2.8)
    • CaSO₄ (3.0 x Ksp)
    • BaSO₄ (10⁵ x Ksp)
    • SrSO₄ (20 x Ksp)
    • CaF₂ (1000 x Ksp)
    • SiO₂ (120 ppm)
  • Other Benefits:
    • Highly effective at low dose rates in a wide range of feedwater types and pH ranges.
    • Compatible with polyelectrolytes.
    • Provides both scale and inorganic fouling control.

Application

  • Injection Point: Injected upstream of the membrane system and, where possible, upstream of cartridge filters.

Dosing Guidelines

  • Typical Dosage Range: 2 to 5 ppm.
  • Custom Dosing: A site-specific dose can be determined using the Avista Advisor computer program. Contact Avista customer service for customized dosing instructions.
  • Consequences of Improper Dosing: Over or underdosing may cause unnecessary membrane system fouling.

Dilution

  • Formulation: Formulated to be injected neat.
  • Dilution Water: If dilution is required, use demineralized or RO permeate water. Softened water may be substituted if these are unavailable.
  • Minimum Solution Strength: The dilution should not result in a solution strength of less than 10% to protect the internal bacteriostat.

Specifications

  • Appearance: Clear, yellow liquid
  • pH (2% solution): 5.0 – 6.5
  • Specific Gravity @ 20°C: 1.10 ± 0.05

Packaging and Storage

  • Standard Packaging Formats:
    • Americas: Pails (45 lbs), Drums (500 lbs), IBC’s (totes) (2500 lbs)
    • EMEA: Pails (23 kgs), Drums (230 kgs), IBC’s (totes) (1100 kgs)
  • Custom Packaging: Available on request.
  • Bulk Delivery: Information on drumless or bulk tanker delivery is available on request.

Disclaimer: This data extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.