
Tóm tắt tài liệu kỹ thuật
Vitec® 5000
Engineering summary from PDF text extraction for Vitec® 5000. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: Vitec® 5000
- Product Type: Antiscalant Product Datasheet
- Manufacturer: Avista Technologies, Inc.
- Formulation: Liquid antiscalant/dispersant blended to inhibit scale and disperse colloidal particles. Approved for use in drinking water by the UK Secretary of State. Compatible with Avista Technologies organic coagulants.
Performance
Vitec® 5000 antiscalant offers:
- Powerful inhibitor against a variety of scales including:
- CaCO₃ (CCPP>900, LSI>2.8)
- CaSO₄ (3.0xKsp)
- BaSO₄ (10⁵ x Ksp)
- SrSO₄ (20 x Ksp)
- CaF (1000 x Ksp)
- SiO₂ (120ppm)
- Highly effective at low dose rates in a wide range of feedwater types and pH ranges.
- Compatible with polyelectrolytes.
- Provides both scale and inorganic fouling control.
- Compatible with all membrane types.
Application
- Injection Point: Injected upstream of the membrane system, and where possible, upstream of cartridge filters.
- Dosing Guidelines:
- Typical dosage range: 2 to 5 ppm.
- Site-specific dose determination available using the Avista Advisor computer program.
- Over or underdosing may cause membrane system fouling. Contact Avista customer service for site-specific dosing instructions.
- Dilution:
- If dilution is required, use demineralized water or RO permeate.
- Softened water may be substituted if demineralized or RO permeate are unavailable.
- Dilution should not exceed 10% by weight.
Specifications
- Appearance: Light amber liquid
- pH (10% solution): 2.0 – 3.0
- Specific Gravity @ 20°C: 1.17 ± 0.05
Packaging and Storage
- Packaging Formats:
- Americas: Pails (45 lbs / 23 kg), Drums (500 lbs / 230 kg), IBC’s (totes) (2500 lbs / 1100 kg)
- EMEA: Pails (23 kg), Drums (230 kg), IBC’s (totes) (1100 kg)
- Custom packaging is available. Drumless or bulk tanker delivery available on request.
Disclaimer: This data extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Nội dung tổng hợp từ tài liệu kỹ thuật công khai nhằm tra cứu và so sánh sơ bộ. Bản tóm tắt không thay thế bảng dữ liệu hiện hành được nhà sản xuất chứng nhận. Kiểm tra phiên bản và giới hạn thiết kế trước khi sử dụng.