العودة إلى 3M Liqui-Flux Ultrafiltration
3M logo

ملخص ورقة البيانات

Membrana Oxyphan 50 / 200 MM

PDF datasheet mirror for Membrana Oxyphan 50 / 200 MM (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Name: 3M™ Membrana™ OXYPHAN™ Capillary Membrane
  • Type: PP 50/200

Membrane Performance Characteristics

  • Nitrogen flux: 75 ± 30 ml/[min x cm² x bar)]

Physical Properties

  • Wall thickness: 50 ± 10 µm
  • Outer diameter: 300 ± 20 µm
  • Inner diameter (nominal): 200 ± 40 µm
  • Maximum pore size (calculated from BP): ≤ 0.2 µm
  • Bubble point (Isopropylalcohol, 23°C): ≥ 3.1 bar
  • Tensile strength: ≥ 150 cN
  • Elongation at break: ≥ 400 %

Chemical Composition

  • Polymer: Polypropylene
  • Solvent residues: ≤ 100 ppm

Available Make-up Configurations

  • Single-thread spools
  • Single layer mats or cross-wound mats

Operating limits

  • Explosion pressure: ≥ 3.0 bar
  • Implosion pressure: ≥ 3.5 bar

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.