العودة إلى 3M Liqui-Flux Ultrafiltration
3M logo

ملخص ورقة البيانات

DuraPes 450

PDF datasheet mirror for DuraPes 450 (3M Liqui-Flux Ultrafiltration). Verify with OEM before design.

Summary

Product identification

  • Product Name: 3M Membrana DuraPES®
  • Membrane Type: Hydrophilic Flat Membrane, Type 450
  • Intended Use: Microfiltration
  • Available Configuration: Rolls
  • Polymer: Polyethersulfone

Membrane Performance Characteristics

  • Bubble point (water, 25 °C): 3.45 bar (≈50.03 psi) ± 0.35 bar (≈5.07 psi) (mean value)
  • Transmembrane flow (water, 25 °C):
    • ≥ 75 ml/(min cm² bar)
    • ≥ 4804.33 ml/(min sq ft psi)
    • ≥ 33.36 ml/(min sq in psi)
  • Retention of bacteria (Serratia marcescens): ≥7 log reduction value

Typical Physical Properties

  • Thickness: 140 µm (≈5.512 mil) ± 10 µm (≈0.394 mil) (mean value)
  • Tensile strength:
    • longitudinal: ≥550 cN / 15 mm
    • transversal: ≥450 cN / 15 mm
  • Elongation at break:
    • longitudinal: ≥10%
    • transversal: ≥15%
  • Change of length (steam, 121 °C): ≤ 3%

Disclaimer: The information provided is extracted from the OEM PDF datasheet and is intended for general reference. This extraction may miss figures, footnotes, or subsequent revisions of the document. For contractual purposes and critical design decisions, all data must be verified against the official OEM PDF revision used on the specific project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.