High Flow

Summary

Product identification

The Nominal High Flow Z filter is a large diameter, polypropylene melt-blown depth media filter designed for high volume filtration. It features a graded density to retain particles throughout its full diameter, offering enhanced dirt-holding capacity and superior SDI reduction. The filter utilizes Z.Plex technology for increased flow filtration.

One High Flow Z filter can provide the dirt-holding capacity of 50 standard 40-inch length depth cartridge filters.

Features and Benefits:

• Large diameter for high volume filtration
• Polypropylene melt-blown depth media filter design
  • Graded density retains particles throughout the full diameter of the filter
  • Enhanced dirt-holding capacity yields quicker upset recovery and less surface binding
  • Outperforms pleated filters
• Easier and less frequent change-outs than conventional standard 2.5 in. outer diameter depth filters
• Lower total cost of filtration operations
• Superior SDI reduction

Applications:

• Amine filtration
• Well injection
• Produced water filtration
• Waterflood
• Enhanced oil recovery

Operating limits

• Maximum pressure drop:
  • 50 psid (3.4 bar) @ 77°F (25°C)
  • 35 psid (2.4 bar) @ 160°F (71°C)
• Recommended change-out pressure drop:
  • 35 psid (2.4 bar) @ 77°F (25°C)

Product water

Efficiency Information: Nominal High Flow Z filters are available in 1 µm and 5 µm micron ratings. Efficiency of nominal filters varies by application and is dependent on particle shape, size, composition, application, and testing protocol. Nominal-rated filters have a wider distribution of pore sizes and rejected particle sizes compared to absolute-rated filters (which reject at least 99% of particles of the listed micron size).

Compliance:

• US FDA 21 CFR compliant materials
• Article 3 of the EU framework Regulation No. 1935/2004/EC Safety requirements
• EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU member states)
• Meets USP Class VI-121 C plastics criteria
• NSF 61 certified
• ACS certified (Attestation de Conformité Sanitaire) (EPDM o-rings only)

Mechanical / hydraulic

Specifications:

• Nominal Micron Ratings: 1, 5 microns
• Lengths:
  • 40 in (101.6 cm)
  • 60 in (152.4 cm)
• Inner Diameter:
  • 40 in length: 1.6 in (4.1 cm)
  • 60 in length: 3.1 in (7.9 cm)
• Outer Diameter: 6.5 in (16.5 cm)

Materials of Construction:

• Filter Media: Polypropylene
• Adapters: Polypropylene
• Elastomer: EPDM

Clean Water Flow Rate: Clean water flow rate data for 40 in and 60 in length filters is provided in graphs showing flow rate against differential pressure. See the official PDF for exact tabulated values.

Ordering Information: Available part numbers:

• 40" Length, 1 µm: 3146356 (HF.ZS 01-40-FSE)
• 40" Length, 5 µm: 3146358 (HF.ZS 05-40-FSE)
• 60" Length, 1 µm: 3156436 (HF.ZS 01-60-TSE)
• 60" Length, 5 µm: 3156621 (HF.ZS 05-60-TSE)

Description Key for Part Numbers:

• End #1 Adapter: F = 226 O-Ring, T = 338 O-Ring
• End #2 Adapter: S = Closed end with ergonomic handle
• Elastomer Material: E = EPDM

Elastomer Kits: Kits are available for different filter lengths, adaptor types, and material (Buna, Silicone, Viton²). Two o-rings are required on 226 adapters for each filter. See the official PDF for exact tabulated part numbers and quantities.

Quality: High Flow Z filters are manufactured under a quality management system certified to meet ISO 9001 standards (ISO 9001:2015 certified processes). Each filter is assigned a lot code to ensure traceability of data and materials. Veolia filter cartridges are designed for resistance to a wide range of chemical solutions, but users should verify chemical compatibility for each application.

---

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror