Datasheet summary
EDR.Z
Engineering summary from PDF text extraction for EDR.Z. Verify every value with the OEM datasheet.
Summary
Product identification
The Absolute High Flow Z* filter is a large diameter, polypropylene melt-blown depth media filter designed for absolute filtration. It utilizes graded density to retain particles throughout the full filter diameter.
Features and Benefits
- Absolute filtration in a large diameter filter format
- Polypropylene melt-blown depth media filter design
- Graded density retains particles throughout the full diameter of the filter
- Enhanced dirt-holding capacity yields quicker upset recovery and less surface binding
- Outperforms most pleated filters
- Easier and less frequent change-outs than conventional standard 2.500 depth filters
- Consistent, reproducible performance and filtration quality
- Lower total cost of filtration operations
- Superior SDI reduction
A single 40-inch High Flow Z filter has the dirt-holding capacity of 50 standard 40-inch length depth cartridge filters.
Applications
- Amine filtration
- Well injection
- Produced water filtration
- Waterflood
- Enhanced oil recovery
Operating limits
- Maximum pressure drop:
- 50 psid (3.4 bar) @ 77°F (25°C)
- 35 psid (2.4 bar) @ 160°F (71°C)
- Recommended change-out pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)
Mechanical / hydraulic
- Ratings: 15, 25, 40, 70 microns (absolute)
- Inner Diameter:
- 40 in length: 1.6 in (4.1 cm)
- 60 in length: 3.1 in (7.9 cm)
- Outer Diameter: 6.5 in (16.5 cm)
- Lengths:
- 40 in (101.6 cm)
- 60 in (152.4 cm)
- Materials of Construction:
- Filter Media: Polypropylene
- Adapters: Polypropylene
- Elastomer: EPDM
Performance / Efficiency
Removal efficiency based on a modified ASTM 795 procedure:
| Micron Rating | Removal Rating (µm) at Various Efficiencies |
|---|---|
| 90.0% | |
| 15 µm | 10.2 |
| 25 µm | 17.9 |
| 40 µm | 26.1 |
| 70 µm | 36.8 |
Graphs illustrating High Flow Z clean water flow rates for 40 in and 60 in length filters are available. See the official PDF for exact tabulated values.
Quality
High Flow Z filters are manufactured under a quality management system certified to meet ISO 9001 standards. Each filter has a lot code for traceability of data and materials.
Certifications
- U.S. FDA 21CFR 177.1520 food contact requirements
- Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
- EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
- USP class VI-121°C Plastics criteria
- NSF 61 criteria
- ISO 9001 criteria
Veolia filter cartridges are designed for resistance to a wide range of chemical solutions. Users should verify chemical compatibility for each application.
Ordering Information
Part Numbers:
| Length | Absolute Micron | Part Number | Description |
|---|---|---|---|
| 40” | 15 | 3146310 | HF.Za 15-40-FSE |
| 40” | 25 | 3138124 | HF.Za 25-40-FSE |
| 40” | 40 | 3146282 | HF.Za 40-40-FSE |
| 40” | 70 | 3137940 | HF.Za 70-40-FSE |
| 60” | 15 | 3155830 | HF.Za 15-60-TSE |
| 60” | 25 | 3155716 | HF.Za 25-60-TSE |
| 60” | 40 | 3155739 | HF.Za 40-60-TSE |
| 60” | 70 | 3155852 | HF.Za 70-60-TSE |
Description Key:
- End #1 Adapter:
- F = 226 O-Ring
- T = 338 O-Ring
- End #2 Adapter: S = Closed End with ergonomic handle
- Elastomer Material: E = EPDM
Elastomer Kits:
| Filter | Adaptor Material | Part number | Quantity |
|---|---|---|---|
| 40" (226) | Buna | 3195517 | 803 |
| 40" (226) | Silicone | 3195811 | 803 |
| 40" (226) | Viton² | 3195812 | 803 |
| 60" (338) | Buna | 3195815 | 25 |
| 60" (338) | Silicone | 3195814 | 25 |
| 60" (338) | Viton² | 3195816 | 25 |
² Viton is a registered mark of The Chemours Company. ³ Two (2) required on 226 adapters for each filter
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.