Datasheet summary
Flotrex AP
Engineering summary from PDF text extraction for Flotrex AP. Verify every value with the OEM datasheet.
Summary
Product identification
Flotrex AP (FAP) filters are absolute-rated filters constructed with gradient density thermally-bonded polypropylene microfiber media. They are designed for air, gas, and liquid filtration.
Available absolute pore size micron ratings:
- 0.65 µm
- 1 µm
- 2 µm
- 3 µm
- 5 µm
- 10 µm
- 20 µm
- 40 µm
Product Overview
These filters combine exceptional solids-holding capacities with precise micron retention ratings. They are constructed of FDA acceptable high-purity polypropylene. Sheets of melt-blown media are layered to provide absolute particle retention, high solids loading, and long service life, with low pressure drop.
Typical Applications
- Prefiltration and Final Chemical Filtration – broad chemical compatibility
- Prefiltration of Pharmaceuticals and Biological Fluids – dependable protection for final filters
- High Throughput for Beer Filtration
Materials of Construction
- Filtration Media: Polypropylene Microfiber
- Support Layers: Polypropylene Microfiber
- Core and Cage: Polypropylene
- Endcaps and Adapters: Polypropylene
Operating limits
- Maximum forward differential pressure: 60 psi (4.14 bar) @ 70°F (21°C)
- Maximum reverse differential pressure: 30 psi (2.07 bar) @ 70°F (21°C)
- Maximum operating temperature: 180°F (82°C) at 10 psid (0.7 bar) in water
Mechanical / Hydraulic
The following dimensions are provided for various filter models:
| Filter Model | Nominal O.D. | Nominal I.D. | Effective Filtration Area |
|---|---|---|---|
| FAP96 | 2.75" (70 mm) | 1.25" (31 mm) | 4.4 ft² (0.41 m²) |
| FAP01 | 2.75" (70 mm) | 1.25” (31 mm) | 4.4 ft² (0.41 m²) |
| FAP03 | 2.75" (70 mm) | 1.25" (31 mm) | 4.4 ft² (0.41 m²) |
| FAP02 | 2.75" (70 mm) | 1.25" (31 mm) | 5.5 ft² (0.51 m²) |
| FAP05 | 2.75" (70 mm) | 1.25" (31 mm) | 5.5 ft² (0.51 m²) |
| FAP10 | 2.75" (70 mm) | 1.25" (31 mm) | 5.5 ft² (0.51 m²) |
| FAP20 | 2.75" (70 mm) | 1.25" (31 mm) | 7.3 ft² (0.68 m²) |
| FAP40 | 2.75" (70 mm) | 1.25" (31 mm) | 7.3 ft² (0.68 m²) |
Flow performance data for clean air and clean water is referenced in the original document (Tables 4 and 5), but these tables are not provided in the extracted text. See the official PDF for exact tabulated values.
Certifications and Sterilization
- Flotrex AP filters meet U.S. FDA requirements for food contact under applicable regulations in 21 CFR.
- They meet the test criteria for USP Class VI-121°C Plastics.
- Aqueous extracts from Flotrex AP filters contain less than 0.25 EU/ml.
- Filters typically exhibit low levels of non-volatile residues.
- Sterilization: Filters may be autoclaved or in situ steam sterilized up to 257°F (125°C) for 30-minute cycles, for a maximum accumulated exposure of 10 hours. Alternatively, filters can be sanitized with compatible chemical agents.
Ordering Information
The ordering code for Flotrex AP filters is constructed from the following components:
- Type: FAP
- Absolute Micron Rating:
- 96 = 0.65 µm
- 01 = 1.0 µm
- 02 = 2.0 µm
- 03 = 3.0 µm
- 05 = 5.0 µm
- 10 = 10.0 µm
- 20 = 20.0 µm
- 40 = 40.0 µm
- Nominal Cartridge Length:
- 1 = 10 in (25 cm)
- 2 = 20 in (51 cm)
- 3 = 30 in (76 cm)
- 4 = 40 in (102 cm)
- End #1 Adapter:
- A = Open end gasket
- B = 120 O-ring
- C = 213 O-ring
- E = 222 O-ring
- F = 226 O-ring
- J = 020 O-ring
- Q = 222 O-ring Stainless steel support ring
- Z = 226 O-ring Stainless steel support ring
- End #2 Adapter:
- A = Open end gasket
- B = 120 O-ring
- C = 213 O-ring
- G = Closed end cap
- H = Fin adapter
- Elastomer Material:
- B = Buna-N
- E = EPDM
- S = Silicone
- T = Teflon encapsulated Viton (only in 222 and 226 sizes)
- V = Viton
Q or Z adapters normally require G or H adapters. Teflon and Viton are registered trademarks of DuPont.
Disclaimer: This summary is based on the provided text extract. The original OEM PDF may contain additional figures, footnotes, or more recent revisions. Contractual data must match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.