3 Round HX Housings

Summary

Product identification

These are 3-round HX cartridge filter housings constructed from 316 Stainless Steel. They are designed for use with 20, 30, 40, or 50 inch filters.

Operating limits

• Liquid Pressure Rating: 150 psig (10.3 bar) @ 200°F (93°C)

Mechanical / hydraulic

• Housing Material: 316 Stainless Steel
• Inlet/Outlet Connections:
  • 1-1/2 inch (3.81 cm) MNPT standard
  • Victaulic and flanges optional
• Pre- and Post-Filter Gauge Ports: 1/4 inch (0.6 cm) FNPT ports for inlet
• Upstream Vent Port: 1/2 inch (0.6 cm) FNPT
• Drain Port: 1/2 inch (1.3 cm) MNPT
• O-Ring Material:
  • Buna-N standard
  • EPDM, Viton, and Teflon encapsulated Viton optional
• Cartridge Lengths: 20, 30, 40, or 50 inch (51, 76, 102, or 127 cm) filters
• Finish: Satin Finish
• Handles: Included on 30, 40, and 50 inch (76, 102, or 127 cm) housing domes
• Dimensional Notes: The bottom of the outlet can be as high as 10 inches (25.4 cm) above the floor or as low as 7.5 inches (19.0 cm) below the floor if mounted over a trench. An optional clamp-on stand allows adjustment of the housing height and the level of the inlet and outlet.

Housing Specifications (Based on B = 5 inches (12.7 cm) on dimensional drawing; this dimension is adjustable. Flow rate is dependent upon cartridge filter selection, fluid properties, and maximum acceptable pressure drop.)

Features and Benefits

• Stainless Steel Construction: Proven corrosion resistance and strength, with an operating pressure up to 150 psig (10.3 bar) at 200°F (93°C).
• Side Inlet and Bottom Outlet: Side inlet is located below the level of the filters, providing non-impinging flow. The bottom outlet allows complete housing drainage and reduces installation space.
• Universal Cup and Post Sealing: Provides lower seal for cartridge filters with open end knife-edge type, "222" O-ring, or "120" O-ring end adapters.
• Hold-Down Plate: Provides upper seal for cartridge filters with patented Hytrex self seal spring, open end knife-edge seal (when used with optional stainless steel cup-and-spring adapters), or fin adapters.
• V-Clamp Closure: Quick and easy cartridge filter replacement reduces labor costs and downtime.
• Clamp-On Stainless Steel Stand (Optional): Allows adjustment of the housing height and the level of the inlet and outlet.

Ordering Information

Model numbers follow the format HX + Number of Cartridges per Housing + Cartridge Length + Inlet/Outlet Size + Port Type + Housing Material + V-Band Clamp Closure.

Example: HX0320-1.5V-316-A

• HX: Hytrex Filter Housing
• 03: 3 cartridges per housing
• 20: 20 inch cartridge length (options: 20, 30, 40, 50 inch)
• 1.5: 1-1/2 inch Inlet/Outlet Size
• V: Port Type (options: V = Victaulic, T = MNPT, F = Flange)
• 316: 316SS Housing Material
• A: V-Band Clamp Closure

Optional Accessories

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror