SUELogo pending
Datasheet summary
XPleat GF T
Engineering summary from PDF text extraction for XPleat GF T. Verify every value with the OEM datasheet.
Summary
Product identification
The XPleat GF-T Filters are designed for general water services, fine process fluid filtration, and processes requiring excellent flow rates.
- General Properties:
- Nominal micron ratings: 0.2, 0.45, 1.0, 3.0, and 10.0 µm.
- Absolute micron ratings: 1.0, 2.0, 4.0, 8.0, and 15.0 µm.
- Materials of Construction:
- Filter Media: Glass microfiber
- Media Support: Polyester
- Components: Polyester
- Sealing: Thermal Bonding
Mechanical / Hydraulic
- Dimensions (nominal):
- Outside Diameter: 2.75” (70 mm)
- Inside Diameter: 1.25” (31 mm)
- Effective Filtration Area: 3.4 ft² (1.32 m²)
- Lengths: 10, 20, 30, 40 inches (25.4, 50.8, 76.2, 101 cm)
- Flow Performance: See the official PDF for exact tabulated values for flow performance in clean water (data based on 10" length filter).
Operating limits
- Maximum Forward Differential Pressure: 60 psid (4.14 bar)
- Maximum Reverse Differential Pressure: 30 psid (2.07 bar)
- Maximum Operating Temperature: 180ºF (82ºC) at 10 psi (0.69 bar) in water
Additional Information
- Chemical Compatibility: These filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Users should carefully verify chemical compatibility as conditions vary with each application.
- Ordering Options: The XPleat GF-T filters are available with different nominal (absolute) micron ratings, lengths, end adapter types, and elastomer materials.
- Available Lengths: 10 (25.4), 20 (50.8), 30 (76.2), 40 (101.6) inches (cm).
- Available Elastomer Materials: Buna-N, EPDM, Silicone, Viton. Viton (a registered trademark of DuPont) gaskets are available for an additional charge.
- Cartridges are supplied in case quantities of six (6).
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions present in the original OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.