Muni.Z

Summary

Product identification

The Muni.Z depth filter utilizes Z.Plex technology and is engineered specifically for municipal water prefiltration, also suitable for general industrial applications.

Key features and benefits include:

• Graded density for particle trapping throughout the filter.
• Lower initial pressure drop compared to conventional depth filters.
• Filter composition contains no resin binders, lubricants, antistatic, or release agents.
• Melt-bonded exterior prevents media migration.
• Designed to provide lower total cost of filtration.

Applications:

• Municipal water systems pre-filtration
• Surface water prefiltration
• Ground water prefiltration
• General industrial use

Operating limits

• Maximum pressure drop: 35 psid (2.4 bar) @ 77°F (25°C)
• Recommended change-out pressure drop: 20 psid (1.4 bar) @ 77°F (25°C)

Mechanical / hydraulic

• Ratings (nominal): 1, 5 microns
• Inner Diameter (Nominal): 1 in (2.5 cm)
• Outer Diameter: 2.46 in (6.2 cm)
• Lengths:
  • 29 1/4 in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)
  • Longer lengths up to 70 in may be available upon request.
• Materials of Construction:
  • Filter Media: Polypropylene
  • Adapters: Polypropylene
  • Elastomer: Buna, EPDM, Silicone, Viton, Santoprene (flat gasket only)

Efficiency Information: Removal efficiency for nominal filters varies by application. While micron ratings of 1 µm and 5 µm are listed, the table for removal efficiency at 90.0%, 99.0%, and 99.9% does not provide specific values. See the official PDF for exact tabulated values and a note regarding nominal filter efficiency.

Clean Water Flow Rate: Clean water flow rate information is presented in Graph 1, based on a 10 in length filter. See the official PDF for graph details.

Certifications

• U.S. FDA 21CFR 177.1520 food contact requirements
• Article 3 of the EU Framework Regulation No. 1935/2004/EC safety requirements
• EU Plastics Regulation No. 10/2011 (may be used as intended in all compliant EU Member states)
• USP class VI-121°C Plastics criteria
• NSF 61 criteria
• ISO 9001 criteria

Muni.Z filters are manufactured under an ISO 9001 certified quality management system. Each filter has a lot code for traceability. Veolia filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions; users should verify chemical compatibility for their specific application.

Ordering Information

To order, replace the numbers in the example Muni.Zs 01-40-ESS with desired values. Columns for Cartridge Length, End #1 Adapter, End #2 Adapter, and Elastomer Material are optional depending on the desired configuration.

• Type: Muni.Zs
• Micron Rating (nominal):
  • 01 = 1 µm
  • 05 = 5 µm
• Cartridge Length:
  • 29 1/4 in (74.3 cm)
  • 30 in (76.2 cm)
  • 39 in (99.1 cm)
  • 40 in (101.6 cm)
  • Longer lengths up to 70 in may be available upon request.
• End #1 Adapter:
  • E = 222 O-Ring
  • F = 226 O-Ring
  • L = Extended Core
  • X = Standard Plain End (no gasket)
  • Y = Flat Gasket
• End #2 Adapter:
  • H = Fin
  • K = Self Seal Spring
  • S = Solid End
  • X = Standard Plain End (no gasket)
  • Y = Flat gasket
• Elastomer Material:
  • B = Buna
  • E = EPDM
  • P = Santoprene (flat gasket only)
  • S = Silicone
  • V = Viton

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror