Datasheet summary
7 Round HX Housings
Engineering summary from PDF text extraction for 7 Round HX Housings. Verify every value with the OEM datasheet.
Summary
Product identification
The 7-Round HX Cartridge Filter Housings are made from stainless steel and combine versatility with value for various applications. Each housing accommodates seven cartridge filters.
Key features include:
- Accommodates seven cartridge filters in 20-, 30-, 40-, or 50-inch lengths (51, 76, 102, or 127 cm).
- Accepts cartridges up to 2.75-inches (7 cm) in diameter.
- Designed to accept filters with a wide variety of end adapters.
- V-band closure design simplifies cartridge filter replacement.
- Side inlet located below the level of the filters, providing non-impinging flow.
- Bottom outlet allows complete drainage and reduces installation space.
- Universal cup and post sealing provides a lower seal for open-end knife-edge type, 222 O-ring, or 120 O-ring end adapters.
- Hold-down plate provides an upper seal for patented Hytrex self-seal spring, open-end knife-edge seal (when used with optional stainless-steel cup and spring adapters).
- All Tungsten Inert Gas (TIG) welding is performed at Veolia factories for quality control.
Operating limits
- Liquid Pressure Rating: 150 psig @ 200° F (10.3 bar @ 93° C)
Mechanical / Hydraulic specifications
- Housing Material: 316 Stainless Steel
- Inlet/Outlet Connections: 2-inch (5.1 cm) MNPT standard; 3" (7.62 cm), Victaulic, and flanges optional
- Pre- and Post-Filter Gauge Ports: 1/4-inch (0.6 cm) FNPT
- Upstream Vent Port: 1/4-inch (0.6 cm) FNPT
- Drain Port: 1/2-inch (1.3 cm) MNPT
- O-Ring Material: Buna-N Standard; EPDM, Viton, and Teflon encapsulated Viton optional
- Cartridge Lengths: 20-, 30-, 40-, or 50-inch filters (51, 76, 102, or 127 cm)
- Finish: Satin Finish
- Handles: Included on 30-, 40-, and 50-inch (76, 102, or 127 cm) housing domes
| Model | Flow Capacity (gpm) | Flow Capacity (Lpm) | Weight (lb) | Weight (kg) | "A" Length (inch) | "A" Length (cm) | "C" Overall Height for Cartridge Removal (inch) | "C" Overall Height for Cartridge Removal (cm) |
|---|---|---|---|---|---|---|---|---|
| HX0720_____-316-A | < 70 | 265 | 64 | 29 | 40 | 102 | 54 | 137 |
| HX0730_____-316-A | < 105 | 397 | 72 | 33 | 50 | 127 | 68 | 173 |
| HX0740_____-316-A | < 140 | 530 | 81 | 37 | 60 | 152 | 88 | 224 |
| HX0750_____-316-A | < 175 | 662 | 90 | 41 | 70 | 178 | 108 | 274 |
- Flow rate is dependent upon cartridge filter selection, fluid properties, and maximum acceptable pressure drop.
- Optional clamp-on stand allows adjustment of housing height and inlet/outlet level.
- Bottom of outlet can be as high as 10 inches (25.4 cm) above the floor or as low as 7.5 inches (19.0 cm) below the floor if mounted over a trench.
Optional Accessories
- HX07 Accessories Kit (includes clamp-on stand, seven spring-cup fittings, and a PVC vent valve)
- HX07 Clamp-on Stand, 316SS
- Spring-cup Fitting, 316SS (necessary for double open-end filters, seven required)
- Pressure Gauge, Back Mount, 316SS, ¼” MNPT, 0-100 psig (6.9 bar)
- HX07 EPDM Housing Seal
- HX07 Viton Housing Seal
- HX07 Teflon Encapsulated Viton Housing Seal
Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. For contractual data, always refer to the official OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.