3 Round HX Housings

Summary

Product identification

The 3-round HX cartridge filter housings are made of stainless steel. They are designed for filter cartridges and are available in various lengths.

Operating limits

• Liquid Pressure Rating: 150 psig (10.3 bar) @ 200°F (93°C)

Mechanical / hydraulic

• Housing Material: 316 Stainless Steel
• Inlet/Outlet Connections:
  • 1-1/2 inch (3.81 cm) MNPT standard
  • Victaulic and flanges optional
• Pre- and Post-Filter Gauge Ports: 1/4 inch (0.6 cm) FNPT ports for inlet Upstream
• Vent Port: 1/2 inch (0.6 cm) FNPT
• Drain Port: 1/2 inch (1.3 cm) MNPT
• O-Ring Material:
  • Buna-N standard
  • EPDM, Viton, and Teflon encapsulated Viton optional
• Cartridge Lengths: 20, 30, 40, or 50 inch filters (51, 76, 102, or 127 cm)
• Finish: Satin Finish
• Handles: Included on 30, 40, and 50 inch (76, 102, or 127 cm) housing domes
• Closure: V-Clamp
• Features:
  • Stainless Steel Construction: Provides corrosion resistance and strength.
  • Side Inlet and Bottom Outlet: Side inlet is located below the filters for non-impinging flow; bottom outlet allows complete drainage and reduces installation space.
  • Universal Cup and Post Sealing: Provides lower seal for cartridge filters with open end knife-edge type, "222" O-ring, or "120" O-ring end adapters.
  • Hold-Down Plate: Provides upper seal for cartridge filters with patented Hytrex self-seal spring, open end knife-edge seal (with optional stainless steel cup-and-spring adapters), or fin adapters.
  • V-Clamp Closure: Facilitates quick and easy cartridge filter replacement.
  • Optional Clamp-On Stainless Steel Stand: Allows adjustment of housing height and inlet/outlet level.
• Outlet Positioning: The bottom of the outlet can be as high as 10 inches (25.4 cm) above the floor or as low as 7.5 inches (19.0 cm) below the floor if mounted over a trench.
• Flow Capacity, Weight, and Dimensions:
  • Flow rate is dependent upon cartridge filter selection, fluid properties, and maximum acceptable pressure drop.
  • "A" Length and "C" Overall Length are based on B = 5 inches (12.7 cm) on dimensional drawing (this dimension is adjustable).

Accessories

• HX03 Accessories Kit: Includes clamp-on stand, three spring-cup fittings, and a PVC vent valve (Part Number: 1226014)
• HX03 Clamp-on Stand, 316SS: (Part Number: 1162553)
• Spring-cup Fitting, 316SS: Necessary for double open end filters, three required (Part Number: 1119540)
• Pressure Gauge, Back Mount, 316SS, 1/4” MNPT: 0-100 psig (6.9 bar) (Part Number: 1164157)
• HX03 EPDM Housing Seal: (Part Number: 1148050)
• HX03 Viton Housing Seal: (Part Number: 1148052)
• HX03 Teflon Encapsulated Viton Housing Seal: (Part Number: 1162139)

Ordering information

Model numbers follow the format HX + Number of Cartridges + Cartridge Length + Inlet/Outlet Size + Port Type + Housing Material + Closure.

• HX: Hytrex Filter Housing
• 03: Number of Cartridges per Housing
• Cartridge Length: 20 inch, 30 inch, 40 inch, 50 inch
• 1.5: Inlet/Outlet Size
• Port Type: V = Victaulic, T = MNPT, F = Flange
• 316: Housing Material (316SS)
• A: V-Band Clamp Closure

---

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror