العودة إلى Pentek filters
Pentair logo

ملخص ورقة البيانات

RO Membrane housings

Engineering summary from PDF text extraction for RO Membrane housings. Verify every value with the OEM datasheet.

Summary

Product identification

This is an RO Membrane Housing designed to accommodate most standard 12" membrane elements. It features a 12" length with a 90º angle outlet.

Features

  • NSF listed component
  • Manufactured from an FDA-approved polypropylene
  • Manufactured in the U.S.A.
  • Both the ribbed cap and the housing are one-piece injection molded parts, requiring no solvents or glues.
  • Ribbed cap incorporates acme square threads and two o-rings to ensure a leak-proof seal.

Mechanical / hydraulic

  • Inlet: Straight
  • Outlets: (2) 90º outlets, eliminating the need for additional elbows.
  • Port Threads: Standard 1/8” NPT threads

Materials of Construction

  • Housing: Reinforced Polypropylene
  • Finish: Reinforced Polypropylene
  • O-Ring: EPDM

Operating limits

  • Maximum Temperature: 125ºF (51.7ºC)
  • Maximum Pressure: 125 psi (8.62 bar)

Caution: Protect against freezing to prevent cracking of the filter and water leakage.


Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. For contractual data, please refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.