العودة إلى Mann + Hummel
MANN+HUMMEL logo

ملخص ورقة البيانات

UA660

Engineering summary from PDF text extraction for UA660. Verify every value with the OEM datasheet.

Summary

Product identification

  • Model: 8040-SB50-TSA
  • Series: 8" CA RO Element Series
  • Membrane Type: SB Cellulose Acetate Blend
  • Configuration: Spiral Wound, Fiberglass Outer Wrap
  • Active Membrane Area: 350 ft² (32.5 m²)

Mechanical / hydraulic

  • Element Weight: 45 lbs (20 kg)
  • Length (A): 40.0 inches (1,016 mm)
  • Diameter (B): 7.9 inches (200 mm)
  • Permeate Tube (C): 1.50 inches (38.1 mm)
  • Feed Spacer: 0.031" thick diamond spacer
  • Maximum Feed Flow: 80 GPM (18 m³/hr)
  • Minimum Brine Flow/Permeate Flow Ratio: 5:1

Operating limits

  • Recommended Applied Pressure: 200 - 500 psi (14 - 34 bar)
  • Maximum Applied Pressure: 600 psi (41 bar)
  • Recommended Operating Temperature: 50 - 90°F (10 - 32°C)
  • Feedwater pH Range: 5.5 nominal, 4 - 7
  • Chlorine Tolerance: 0.5 ppm nominal, 1.0 ppm max
  • Maximum SDI (15 minutes): 5.0
  • Maximum Turbidity: 1 NTU

Product water

Performance is based on the following test conditions: 2,000.0 ppm NaCl, 420.0 psi, 25°C, 15% recovery, pH 5.5, 30 minutes operation.

  • Permeate flow: 8,500 GPD (32.0 m³/day)
  • Average Salt Rejection: 95.00 %
  • Minimum Salt Rejection: 92.50 %

Disclaimer: This summary is based on the provided text extract. The full OEM PDF datasheet may contain additional figures, footnotes, or more recent revisions. For contractual data, always refer to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet

أُعد المحتوى من مراجع تقنية عامة للبحث والمقارنة الأولية. لا يغني الملخص عن ورقة بيانات حالية معتمدة من الشركة المصنعة. تحقق من الإصدارات وحدود التصميم قبل الاستخدام.